Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
ezfit:solutions_guide:intellio [2009/08/31 13:27]
ajdavis 		ezfit:solutions_guide:intellio [2009/09/01 09:35] (current)
ajdavis
Line 10: Line 10:
  * Tips:  * Tips:
     * Check ear canal for wax/debris.     * Check ear canal for wax/debris.
 +    * Check for loose physical fit of hearing aid in concha.
     * Check receiver direction and canal length.     * Check receiver direction and canal length.
     * Reduce vent.     * Reduce vent.
Line 15: Line 16:
  
 === Background Noise === === Background Noise ===
 +  *Adaptive:  Enable Adaptive Noise Reduction.
  * Adaptive:  Increase level of Adaptive Noise Reduction.  * Adaptive:  Increase level of Adaptive Noise Reduction.
  * Equalizer:  Decrease Gain at 200 & 500 Hz.  * Equalizer:  Decrease Gain at 200 & 500 Hz.
Line 24: Line 26:
 <del> * Tips: <del> * Tips:
     * If these programming solutions are insufficient, please call Audina to discuss the value of directional microphones (if not already in use).</del> (Removed Tips and last statement: Unnecessary.  --- //[[jsudduth@audina.net|Jenny Sudduth]] 2008/09/10 12:29// )     * If these programming solutions are insufficient, please call Audina to discuss the value of directional microphones (if not already in use).</del> (Removed Tips and last statement: Unnecessary.  --- //[[jsudduth@audina.net|Jenny Sudduth]] 2008/09/10 12:29// )
 + * Tips:
 +    * For instruments with directional microphones:For instruments with directional microphones:
 + #Consider additional program with fixed cartioid input (Under Adjustments>Advanced Tab)
 +         #Consider changing primary program microphone input to fixed cartiod (Under Adjustments>Advanced Tab)
 +    * For instruments without directional microphones:
 +        If these programming solutions are insufficient,please call Support to discuss the value of directional microphones (if not already in use).
  
 === Rushing Water/Fan Noise/Static/Circuit Noise === === Rushing Water/Fan Noise/Static/Circuit Noise ===
Line 98: Line 106:
  * Equalizer: Increase Gain from 1.0 - 3.5 kHz.  * Equalizer: Increase Gain from 1.0 - 3.5 kHz.
  * Equalizer: Increase Gain at 200, 500 Hz.   * Equalizer: Increase Gain at 200, 500 Hz. 
- 
- 
 === Pumping (Cuts In and Out) === === Pumping (Cuts In and Out) ===
  * Compression: Increase TK in all channels.  * Compression: Increase TK in all channels.
Line 105: Line 111:
  * Advanced: Increase MPO.  * Advanced: Increase MPO.
  
-Example Intuition 8 XML code+Example Intuition 8 XML code modified by Barbara
 <code XML> <code XML>
 <CIRCUIT Code="INTUITION8" Title="Instrument Model: Intuition 8"> <CIRCUIT Code="INTUITION8" Title="Instrument Model: Intuition 8">
Line 113: Line 119:
    <STEP Action="S" Value="1" Param="FBC_Enable"></STEP>    <STEP Action="S" Value="1" Param="FBC_Enable"></STEP>
  </ADJUSTMENT>  </ADJUSTMENT>
- <ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Equalizer:  Decrease Gain at 2.5 - 3.5 kHz."> + <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Advanced: Decrease MPO."> 
-   <STEP Action="D" IncBy="-2" Param="BEQ6_gain"></STEP> +   <STEP Action="I" IncBy="1" Param="MPO_level"></STEP>
-   <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP> +
-   <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP>+
  </ADJUSTMENT>  </ADJUSTMENT>
  <ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Equalizer:  Decrease Gain at 4.2 - 7.2 kHz.">  <ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Equalizer:  Decrease Gain at 4.2 - 7.2 kHz.">
Line 124: Line 128:
    <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>    <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
  </ADJUSTMENT>  </ADJUSTMENT>
- <ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 3.0 - 7.2 kHz.">+ <ADJUSTMENT Row="3" Steps="2"  Action="Y" Title="Equalizer:  Decrease Gain at 2.5 - 3.5 kHz."> 
 +   <STEP Action="D" IncBy="-2" Param="BEQ6_gain"></STEP> 
 +   <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP> 
 +   <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP> 
 + </ADJUSTMENT> 
 + <ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 3.0 - 7.2 kHz.">
    <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP>    <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP>
    <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP>    <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP>
Line 132: Line 141:
    <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>    <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
  </ADJUSTMENT>  </ADJUSTMENT>
- <ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Decrease Overall Gain.">+ <ADJUSTMENT Row="5" Steps="3"  Action="Y" Title="Decrease Overall Gain.">
  <STEP Action="I" IncBy="2" Param="matrix_gain"/>  <STEP Action="I" IncBy="2" Param="matrix_gain"/>
  </ADJUSTMENT>  </ADJUSTMENT>
- <ADJUSTMENT Row="5" Steps="1"  Action="N" Title=""></ADJUSTMENT> + <ADJUSTMENT Row="6" Steps="1"  Action="N" Title=""></ADJUSTMENT> 
- <ADJUSTMENT Row="6" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT> + <ADJUSTMENT Row="7" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT> 
- <ADJUSTMENT Row="7" Steps="1"  Action="N" Title="Check ear canal for wax/debris."/> + <ADJUSTMENT Row="8" Steps="1"  Action="N" Title="Check ear canal for wax/debris."/> 
- <ADJUSTMENT Row="8" Steps="1"  Action="N" Title="Check receiver direction and canal length."/> + <ADJUSTMENT Row="9" Steps="1"  Action="N" Title="Check for loose physical fit."/> 
- <ADJUSTMENT Row="9" Steps="1"  Action="N" Title="Reduce vent."/>+ <ADJUSTMENT Row="10" Steps="1"  Action="N" Title="Check receiver direction and canal length."/> 
 + <ADJUSTMENT Row="11" Steps="1"  Action="N" Title="Reduce vent."/>
   </ADJUSTMENTS>   </ADJUSTMENTS>
 </ISSUE> </ISSUE>
 <ISSUE Title="Background Noise"> <ISSUE Title="Background Noise">
   <ADJUSTMENTS Code="INTUITION8 Background Noise">   <ADJUSTMENTS Code="INTUITION8 Background Noise">
-    <ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Adaptive:  Increase level of Adaptive Noise Reduction.">+ 
 + 
 + 
 +     <ADJUSTMENT Row="0" Steps="1"  Action="Y" Title="Adaptive:  Activate Adaptive Noise Reduction."> 
 +   <STEP Action="S" Value="1" Param="Noise_Reduction_Enable"></STEP> 
 + 
 + 
 + 
 + </ADJUSTMENT> 
 +    <ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Adaptive:  Increase level of Adaptive Noise Reduction.">
       <STEP Action="I" IncBy="1" Param="Noise_Reduction"></STEP>       <STEP Action="I" IncBy="1" Param="Noise_Reduction"></STEP>
     </ADJUSTMENT>     </ADJUSTMENT>
-    <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500 Hz.">+    <ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500 Hz.">
       <STEP Action="D" IncBy="-2" Param="BEQ1_gain"></STEP>       <STEP Action="D" IncBy="-2" Param="BEQ1_gain"></STEP>
       <STEP Action="D" IncBy="-2" Param="BEQ2_gain"></STEP>       <STEP Action="D" IncBy="-2" Param="BEQ2_gain"></STEP>
     </ADJUSTMENT>     </ADJUSTMENT>
- <ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Compression:  Increase Compression Ratio in Ch 1, 2.">+ <ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Advanced: Decrease MPO."> 
 +   <STEP Action="I" IncBy="1" Param="MPO_level"></STEP> 
 + </ADJUSTMENT> 
 + <ADJUSTMENT Row="4" Steps="2"  Action="Y" Title="Compression:  Increase Compression Ratio in Ch 1, 2, 3.">
     <STEP Action="I" IncBy="2" Param="C1_Ratio"></STEP>     <STEP Action="I" IncBy="2" Param="C1_Ratio"></STEP>
     <STEP Action="I" IncBy="2" Param="C2_Ratio"></STEP>     <STEP Action="I" IncBy="2" Param="C2_Ratio"></STEP>
 +    <STEP Action="I" IncBy="2" Param="C3_Ratio"></STEP>
  </ADJUSTMENT>  </ADJUSTMENT>
- <ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Equalizer:  Increase Gain at 1.5 - 3.5 kHz">+ <ADJUSTMENT Row="5" Steps="2"  Action="Y" Title="Compression: Increase TK in Ch 1, 2, 3."> 
 +    <STEP Action="I" IncBy="1" Param="C1_TK"></STEP> 
 +    <STEP Action="I" IncBy="1" Param="C2_TK"></STEP> 
 +    <STEP Action="I" IncBy="1" Param="C3_TK"></STEP> 
 + </ADJUSTMENT> 
 + <ADJUSTMENT Row="6" Steps="3"  Action="Y" Title="Equalizer:  Increase Gain at 1.5 - 3.5 kHz">
    <STEP Action="I" IncBy="2" Param="BEQ4_gain"></STEP>    <STEP Action="I" IncBy="2" Param="BEQ4_gain"></STEP>
    <STEP Action="I" IncBy="2" Param="BEQ5_gain"></STEP>    <STEP Action="I" IncBy="2" Param="BEQ5_gain"></STEP>
Line 162: Line 190:
    <STEP Action="I" IncBy="2" Param="BEQ8_gain"></STEP>    <STEP Action="I" IncBy="2" Param="BEQ8_gain"></STEP>
  </ADJUSTMENT>  </ADJUSTMENT>
- <ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Decrease Overall Gain.">+ <ADJUSTMENT Row="7" Steps="3"  Action="Y" Title="Decrease Overall Gain.">
  <STEP Action="I" IncBy="2" Param="matrix_gain"/>  <STEP Action="I" IncBy="2" Param="matrix_gain"/>
  </ADJUSTMENT>  </ADJUSTMENT>
- <ADJUSTMENT Row="5" Steps="1"  Action="N" Title=""></ADJUSTMENT> + <ADJUSTMENT Row="8" Steps="1"  Action="N" Title=""></ADJUSTMENT> 
- <ADJUSTMENT Row="6" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT> + <ADJUSTMENT Row="9" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT> 
- <ADJUSTMENT Row="7" Steps="1"  Action="N" Title="If these programming solutions are insufficient, "></ADJUSTMENT> + <ADJUSTMENT Row="10" Steps="1"  Action="N" Title="For instruments with directional microphones:"></ADJUSTMENT> 
- <ADJUSTMENT Row="8" Steps="1"  Action="N" Title="please call Support to discuss the value of"></ADJUSTMENT> + <ADJUSTMENT Row="11" Steps="1"  Action="N" Title="1. Consider additional program with fixed"></ADJUSTMENT> 
- <ADJUSTMENT Row="9" Steps="1"  Action="N" Title="directional microphones (if not already in use)."></ADJUSTMENT>+ <ADJUSTMENT Row="12" Steps="1"  Action="N" Title="   cartioid input (Under Adjustments>Advanced Tab)"></ADJUSTMENT> 
 + <ADJUSTMENT Row="13" Steps="1"  Action="N" Title="2. Consider changing program microphone input to fixed"></ADJUSTMENT> 
 + <ADJUSTMENT Row="14" Steps="1"  Action="N" Title="   cartiod polar(Under Adjustments>Advanced Tab)"></ADJUSTMENT> 
 +  
 + <ADJUSTMENT Row="15" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT> 
 + <ADJUSTMENT Row="16" Steps="1"  Action="N" Title="For instruments without directional microphones:"></ADJUSTMENT> 
 + <ADJUSTMENT Row="17" Steps="1"  Action="N" Title="If these programming solutions are insufficient, "></ADJUSTMENT> 
 + <ADJUSTMENT Row="18" Steps="1"  Action="N" Title="please call Support to discuss the value of"></ADJUSTMENT> 
 + <ADJUSTMENT Row="19" Steps="1"  Action="N" Title="directional microphones (if not already in use)."></ADJUSTMENT>
   </ADJUSTMENTS>   </ADJUSTMENTS>
 </ISSUE> </ISSUE>
 <ISSUE Title="Rushing Water/Fan Noise/Static/Circuit Noise"> <ISSUE Title="Rushing Water/Fan Noise/Static/Circuit Noise">
   <ADJUSTMENTS Code="INTUITION8 Rushing Water/Fan Noise/Static/Circuit Noise">   <ADJUSTMENTS Code="INTUITION8 Rushing Water/Fan Noise/Static/Circuit Noise">
 +
 +
 + <ADJUSTMENT Row="0" Steps="1"  Action="Y" Title="Adaptive:  Activate Adaptive Noise Reduction.">
 +   <STEP Action="S" Value="1" Param="Noise_Reduction_Enable"></STEP>
 +
 +
  <ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Adaptive:  Increase level of Adaptive Noise Reduction.">  <ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Adaptive:  Increase level of Adaptive Noise Reduction.">
    <STEP Action="I" IncBy="1" Param="Noise_Reduction"></STEP>    <STEP Action="I" IncBy="1" Param="Noise_Reduction"></STEP>
Line 205: Line 247:
   </ADJUSTMENTS>   </ADJUSTMENTS>
 </ISSUE> </ISSUE>
 + 
 <ISSUE Title="Can hear but not understand / Speech is unclear"> <ISSUE Title="Can hear but not understand / Speech is unclear">
   <ADJUSTMENTS Code="INTUITION8 Can hear but not understand / Speech is unclear">   <ADJUSTMENTS Code="INTUITION8 Can hear but not understand / Speech is unclear">
Line 232: Line 274:
   </ADJUSTMENTS>   </ADJUSTMENTS>
 </ISSUE> </ISSUE>
 + 
 <ISSUE Title="Can hear distant sounds but not close up"> <ISSUE Title="Can hear distant sounds but not close up">
 <ADJUSTMENTS Code="INTUITION8 Can hear distant sounds but not close up"> <ADJUSTMENTS Code="INTUITION8 Can hear distant sounds but not close up">
Line 259: Line 301:
   </ADJUSTMENTS>   </ADJUSTMENTS>
 </ISSUE> </ISSUE>
 + 
 <ISSUES Title="Own Voice"> <ISSUES Title="Own Voice">
   <ISSUE Title="Barrel/Hollow/Echo/Plugged/Occlusion">   <ISSUE Title="Barrel/Hollow/Echo/Plugged/Occlusion">
Line 277: Line 319:
     <STEP Action="D" IncBy="-1" Param="C4_TK"></STEP>     <STEP Action="D" IncBy="-1" Param="C4_TK"></STEP>
  </ADJUSTMENT>  </ADJUSTMENT>
- <ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Reduce Overall Gain.">+ 
 + 
 +  
 +    <ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Equalizer:  Increase Gain at 1.5 - 3.5 kHz."> 
 +      <STEP Action="I" IncBy="2" Param="BEQ4_gain"></STEP> 
 +      <STEP Action="I" IncBy="2" Param="BEQ5_gain"></STEP> 
 +      <STEP Action="I" IncBy="2" Param="BEQ6_gain"></STEP> 
 +      <STEP Action="I" IncBy="2" Param="BEQ7_gain"></STEP> 
 +    </ADJUSTMENT> 
 + 
 + 
 + 
 + 
 + 
 + <ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Reduce Overall Gain.">
       <STEP Action="I" IncBy="2" Param="matrix_gain"></STEP>       <STEP Action="I" IncBy="2" Param="matrix_gain"></STEP>
     </ADJUSTMENT>     </ADJUSTMENT>
-    <ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Advanced: Increase MPO.">+    <ADJUSTMENT Row="5" Steps="3"  Action="Y" Title="Advanced: Increase MPO.">
    <STEP Action="D" IncBy="-1" Param="MPO_level"></STEP>    <STEP Action="D" IncBy="-1" Param="MPO_level"></STEP>
     </ADJUSTMENT>     </ADJUSTMENT>
-    <ADJUSTMENT Row="5" Steps="1"  Action="N" Title=""></ADJUSTMENT> +    <ADJUSTMENT Row="6" Steps="1"  Action="N" Title=""></ADJUSTMENT> 
-    <ADJUSTMENT Row="6" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT> +    <ADJUSTMENT Row="7" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT> 
-    <ADJUSTMENT Row="7" Steps="1"  Action="N" Title="Enlarge and/or step back vent."/> +    <ADJUSTMENT Row="8" Steps="1"  Action="N" Title="Enlarge and/or step back vent."/> 
- <ADJUSTMENT Row="8" Steps="1"  Action="N" Title="Taper canal."/> + <ADJUSTMENT Row="9" Steps="1"  Action="N" Title="Taper canal."/> 
- <ADJUSTMENT Row="9" Steps="1"  Action="N" Title="Remake to shorten/lengthen canal accordingly."/> + <ADJUSTMENT Row="10" Steps="1"  Action="N" Title="Remake to shorten/lengthen canal accordingly."/> 
- <ADJUSTMENT Row="10" Steps="1"  Action="N" Title="Counsel."/>+ <ADJUSTMENT Row="11" Steps="1"  Action="N" Title="Counsel."/>
    </ADJUSTMENTS>    </ADJUSTMENTS>
   </ISSUE>   </ISSUE>
 + 
   <ISSUE Title="Tinny/Harsh/Raspy">   <ISSUE Title="Tinny/Harsh/Raspy">
   <ADJUSTMENTS Code="INTUITION8 Tinny/Harsh/Raspy">   <ADJUSTMENTS Code="INTUITION8 Tinny/Harsh/Raspy">
Line 318: Line 374:
   </ADJUSTMENTS>   </ADJUSTMENTS>
   </ISSUE>   </ISSUE>
 + 
 </ISSUES> </ISSUES>
 + 
 <ISSUES Title="Too Loud"> <ISSUES Title="Too Loud">
     <ISSUE Title="All Sounds Too Loud">     <ISSUE Title="All Sounds Too Loud">
Line 336: Line 392:
    </ADJUSTMENTS>    </ADJUSTMENTS>
  </ISSUE>  </ISSUE>
 + 
  <ISSUE Title="Loud Sounds Too Loud">  <ISSUE Title="Loud Sounds Too Loud">
    <ADJUSTMENTS Code="INTUITION8 Loud Sounds Too Loud">    <ADJUSTMENTS Code="INTUITION8 Loud Sounds Too Loud">
Line 356: Line 412:
    </ADJUSTMENTS>    </ADJUSTMENTS>
  </ISSUE>  </ISSUE>
 + 
  <ISSUE Title="Dishes/Water/Paper Too Loud">  <ISSUE Title="Dishes/Water/Paper Too Loud">
    <ADJUSTMENTS Code="INTUITION8 Dishes/Water/Paper Too Loud">    <ADJUSTMENTS Code="INTUITION8 Dishes/Water/Paper Too Loud">
Line 379: Line 435:
    </ADJUSTMENTS>    </ADJUSTMENTS>
  </ISSUE>  </ISSUE>
 + 
 </ISSUES> </ISSUES>
 + 
 <ISSUES Title="Too Soft (Weak)"> <ISSUES Title="Too Soft (Weak)">
  <ISSUE Title="Soft Sounds Too Soft">  <ISSUE Title="Soft Sounds Too Soft">
Line 408: Line 464:
  </ISSUE>  </ISSUE>
 </ISSUES> </ISSUES>
 + 
 <ISSUE Title="Tinny/Harsh/Sharp"> <ISSUE Title="Tinny/Harsh/Sharp">
   <ADJUSTMENTS Code="INTUITION8 Tinny/Harsh/Sharp">   <ADJUSTMENTS Code="INTUITION8 Tinny/Harsh/Sharp">
Line 433: Line 489:
   </ADJUSTMENTS>   </ADJUSTMENTS>
 </ISSUE> </ISSUE>
 + 
 <ISSUE Title="No Perceived Benefit"> <ISSUE Title="No Perceived Benefit">
   <ADJUSTMENTS Code="INTUITION8 No Perceived Benefit">   <ADJUSTMENTS Code="INTUITION8 No Perceived Benefit">
Line 453: Line 509:
   </ADJUSTMENTS>   </ADJUSTMENTS>
 </ISSUE> </ISSUE>
 + 
 <ISSUE Title="Pumping (Cuts In and Out)"> <ISSUE Title="Pumping (Cuts In and Out)">
   <ADJUSTMENTS Code="INTUITION8 Pumping (Cuts In and Out)">   <ADJUSTMENTS Code="INTUITION8 Pumping (Cuts In and Out)">
Line 471: Line 527:
   </ADJUSTMENTS>   </ADJUSTMENTS>
 </ISSUE> </ISSUE>
 + 
 </CIRCUIT> </CIRCUIT>
 </code> </code>
ezfit/solutions_guide/intellio.1251739652.txt.gz · Last modified: 2009/08/31 13:27 by ajdavis
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International


  • Show page
  • Old revisions
  • Backlinks
  • Recent Changes
  • Media Manager
  • Sitemap