Solutions Guide: Intellio

Feedback/Whistling

  • Adaptive: Activate Adaptive Feedback Canceller.
  • Advanced: Decrease MPO (Added 9/9/08. Assists feedback canceller without applying gain reduction. — Jenny Sudduth 2008/09/09 18:59 )
  • Equalizer: Decrease Gain at 4.2 - 7.2 kHz. (Reordered equalizer steps, better to decrease these frequencies first. — Jenny Sudduth 2008/09/09 18:59 )
  • Equalizer: Decrease Gain at 2.5 - 3.5 kHz.
  • Equalizer: Decrease Gain at 3.0 - 7.2 kHz.
  • Decrease Overall Gain.
  • Tips:
    • Check ear canal for wax/debris.
    • Check for loose physical fit of hearing aid in concha.
    • Check receiver direction and canal length.
    • Reduce vent.

Background Noise

  • Adaptive: Enable Adaptive Noise Reduction.
  • Adaptive: Increase level of Adaptive Noise Reduction.
  • Equalizer: Decrease Gain at 200 & 500 Hz.
  • Compression: Decrease MPO in all channels (Added MPO as new setting. — Jenny Sudduth 2008/09/10 12:29 )
  • Compression: Increase Compression Ratio in Channels 1, 2, & 3.
  • Compression: Increase TK in all channels 1, 2, & 3. (Added TK as new setting. — Jenny Sudduth 2008/09/10 12:29 )
  • Equalizer: Increase Gain at 1.5 - 3.5 kHz.
  • Decrease Overall Gain.

* Tips: * If these programming solutions are insufficient, please call Audina to discuss the value of directional microphones (if not already in use). (Removed Tips and last statement: Unnecessary. — Jenny Sudduth 2008/09/10 12:29 )

  • Tips:
    • For instruments with directional microphones:For instruments with directional microphones:
  1. Consider additional program with fixed cartioid input (Under Adjustments>Advanced Tab)
    1. Consider changing primary program microphone input to fixed cartiod (Under Adjustments>Advanced Tab)
  • For instruments without directional microphones:

If these programming solutions are insufficient,please call Support to discuss the value of directional microphones (if not already in use).

Rushing Water/Fan Noise/Static/Circuit Noise

  • Adaptive: Increase level of Adaptive Noise Reduction.
  • Equalizer: Decrease Gain at 200, 500, 1000 Hz.
  • Equalizer: Decrease Gain at 4.2 - 7.2 kHz.
  • Compression: Decrease TK in Ch 1, 2, 3, 4.
  • Compression: Decrease TK in Ch 5, 6, 7, 8.
  • Tips:
    • Enlarge vent.

Can hear but not understand / Speech is unclear

  • Equalizer: Increase Gain at 1.5 - 3.5 kHz.
  • Equalizer: Decrease Gain at 200, 500 Hz.
  • Compression: Decrease Compression Ratio in Ch 3, 4, 5, 6, 7, 8. (Added ch. 3 & 4. — Jenny Sudduth 2008/09/10 13:17 )
  • Advanced: Increase MPO.
  • Increase Overall Gain.

Can hear distant sounds but not close up

  • Compression: Increase TK in all channels.
  • Compression: Decrease Compression Ratio in Ch 1, 2, 3, 4.
  • Compression: Decrease Compression Ratio in Ch 5, 6, 7, 8.

Own Voice

Barrel/Hollow/Echo/Plugged/Occlusion

  • Equalizer: Decrease Gain at 200, 500 Hz.
  • Compression: Increase Compression Ratio in Ch 1, 2.
  • Compression: Decrease TK in channel 1, 2, 3, 4.
  • Reduce Overall Gain.
  • Advanced: Increase MPO.
  • Tips:
    • Enlarge and/or step back vent.
    • Taper canal.
    • Remake to shorten/lengthen canal accordingly.
    • Counsel.

Tinny/Harsh/Raspy

  • Equalizer: Reduce gain at 1.5 - 4.2 kHz.
  • Equalizer: Reduce gain at 4.2 - 7.2 kHz.
  • Reduce Overall Gain.
  • Equalizer: Increase Gain at 200, 500, 1000 Hz.

Too Loud

All Sounds Too Loud

  • Decrease Overall Gain.
  • Equalizer: Decrease Gain at 200, 500 Hz.
  • Advanced: Decrease MPO.

Loud Sounds Too Loud

  • Advanced: Decrease MPO.
  • Compression: Increase Compression Ratio in Ch 1, 2, 3, 4.
  • Compression: Increase Compression Ratio in Ch 5, 6, 7, 8.

Dishes/Water/Paper Too Loud

  • Compression: Increase Compression Ratio in Ch 5, 6, 7, 8.
  • Advanced: Decrease MPO.
  • Equalizer: Decrease Gain at 2.5 - 7.2 kHz.

Too Soft (Weak)

Soft Sounds Too Soft

  • Adaptive: Decrease level of Adaptive Noise Reduction.
  • Increase Overall Gain.

All Sounds Too Soft

  • Increase Overall Gain.
  • Advanced: Increase MPO.
  • Advanced: Increase Gain at 200, 500 Hz.

Tinny/Harsh/Sharp

  • Equalizer: Decrease Gain at 2.5 - 7.2 kHz.
  • Equalizer: Decrease Gain at 4.2 - 7.2 kHz.
  • Advanced: Increase Gain at 200, 500, 1000 Hz.

No Perceived Benefit

  • Increase Overall Gain.
  • Equalizer: Increase Gain from 1.0 - 3.5 kHz.
  • Equalizer: Increase Gain at 200, 500 Hz.

Pumping (Cuts In and Out)

  • Compression: Increase TK in all channels.
  • Compression: Decrease Compression Ratio in all channels. (Added Compression Step. — Jenny Sudduth 2008/09/10 13:31 )
  • Advanced: Increase MPO.

Example Intuition 8 XML code modified by Barbara 

<CIRCUIT Code="INTUITION8" Title="Instrument Model: Intuition 8">
<ISSUE Title="Feedback/Whistling">
  <ADJUSTMENTS Code="INTUITION8 Feedback/Whistling">
	 <ADJUSTMENT Row="0" Steps="1"  Action="Y" Title="Adaptive:  Activate Adaptive Feedback Canceller.">
	  <STEP Action="S" Value="1" Param="FBC_Enable"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Advanced: Decrease MPO.">
		  <STEP Action="I" IncBy="1" Param="MPO_level"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Equalizer:  Decrease Gain at 4.2 - 7.2 kHz.">
	  <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="3" Steps="2"  Action="Y" Title="Equalizer:  Decrease Gain at 2.5 - 3.5 kHz.">
	  <STEP Action="D" IncBy="-2" Param="BEQ6_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 3.0 - 7.2 kHz.">
	  <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="5" Steps="3"  Action="Y" Title="Decrease Overall Gain.">
		<STEP Action="I" IncBy="2" Param="matrix_gain"/>
	</ADJUSTMENT>
	<ADJUSTMENT Row="6" Steps="1"  Action="N" Title=""></ADJUSTMENT>
	<ADJUSTMENT Row="7" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT>
	<ADJUSTMENT Row="8" Steps="1"  Action="N" Title="Check ear canal for wax/debris."/>
	<ADJUSTMENT Row="9" Steps="1"  Action="N" Title="Check for loose physical fit."/>
	<ADJUSTMENT Row="10" Steps="1"  Action="N" Title="Check receiver direction and canal length."/>
	<ADJUSTMENT Row="11" Steps="1"  Action="N" Title="Reduce vent."/>
  </ADJUSTMENTS>
</ISSUE>
<ISSUE Title="Background Noise">
  <ADJUSTMENTS Code="INTUITION8 Background Noise">
 
 
 
   	 <ADJUSTMENT Row="0" Steps="1"  Action="Y" Title="Adaptive:  Activate Adaptive Noise Reduction.">
	  <STEP Action="S" Value="1" Param="Noise_Reduction_Enable"></STEP>
 
 
 
	</ADJUSTMENT>
    <ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Adaptive:  Increase level of Adaptive Noise Reduction.">
      <STEP Action="I" IncBy="1" Param="Noise_Reduction"></STEP>
    </ADJUSTMENT>
    <ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500 Hz.">
      <STEP Action="D" IncBy="-2" Param="BEQ1_gain"></STEP>
      <STEP Action="D" IncBy="-2" Param="BEQ2_gain"></STEP>
    </ADJUSTMENT>
	<ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Advanced: Decrease MPO.">
		  <STEP Action="I" IncBy="1" Param="MPO_level"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="4" Steps="2"  Action="Y" Title="Compression:  Increase Compression Ratio in Ch 1, 2, 3.">
	   <STEP Action="I" IncBy="2" Param="C1_Ratio"></STEP>
	   <STEP Action="I" IncBy="2" Param="C2_Ratio"></STEP>
	   <STEP Action="I" IncBy="2" Param="C3_Ratio"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="5" Steps="2"  Action="Y" Title="Compression: Increase TK in Ch 1, 2, 3.">
	   <STEP Action="I" IncBy="1" Param="C1_TK"></STEP>
	   <STEP Action="I" IncBy="1" Param="C2_TK"></STEP>
	   <STEP Action="I" IncBy="1" Param="C3_TK"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="6" Steps="3"  Action="Y" Title="Equalizer:  Increase Gain at 1.5 - 3.5 kHz">
	  <STEP Action="I" IncBy="2" Param="BEQ4_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ5_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ6_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ7_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ8_gain"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="7" Steps="3"  Action="Y" Title="Decrease Overall Gain.">
		<STEP Action="I" IncBy="2" Param="matrix_gain"/>
	</ADJUSTMENT>
	<ADJUSTMENT Row="8" Steps="1"  Action="N" Title=""></ADJUSTMENT>
	<ADJUSTMENT Row="9" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT>
	<ADJUSTMENT Row="10" Steps="1"  Action="N" Title="For instruments with directional microphones:"></ADJUSTMENT>
	<ADJUSTMENT Row="11" Steps="1"  Action="N" Title="1. Consider additional program with fixed"></ADJUSTMENT>
	<ADJUSTMENT Row="12" Steps="1"  Action="N" Title="   cartioid input (Under Adjustments>Advanced Tab)"></ADJUSTMENT>
	<ADJUSTMENT Row="13" Steps="1"  Action="N" Title="2. Consider changing program microphone input to fixed"></ADJUSTMENT>
	<ADJUSTMENT Row="14" Steps="1"  Action="N" Title="   cartiod polar(Under Adjustments>Advanced Tab)"></ADJUSTMENT>
 
	<ADJUSTMENT Row="15" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT>
	<ADJUSTMENT Row="16" Steps="1"  Action="N" Title="For instruments without directional microphones:"></ADJUSTMENT>
	<ADJUSTMENT Row="17" Steps="1"  Action="N" Title="If these programming solutions are insufficient, "></ADJUSTMENT>
	<ADJUSTMENT Row="18" Steps="1"  Action="N" Title="please call Support to discuss the value of"></ADJUSTMENT>
	<ADJUSTMENT Row="19" Steps="1"  Action="N" Title="directional microphones (if not already in use)."></ADJUSTMENT>
  </ADJUSTMENTS>
</ISSUE>
<ISSUE Title="Rushing Water/Fan Noise/Static/Circuit Noise">
  <ADJUSTMENTS Code="INTUITION8 Rushing Water/Fan Noise/Static/Circuit Noise">
 
 
	<ADJUSTMENT Row="0" Steps="1"  Action="Y" Title="Adaptive:  Activate Adaptive Noise Reduction.">
	  <STEP Action="S" Value="1" Param="Noise_Reduction_Enable"></STEP>
 
 
	<ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Adaptive:  Increase level of Adaptive Noise Reduction.">
	  <STEP Action="I" IncBy="1" Param="Noise_Reduction"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500, 1000 Hz.">
	   <STEP Action="D" IncBy="-2" Param="BEQ1_gain"></STEP>
	   <STEP Action="D" IncBy="-2" Param="BEQ2_gain"></STEP>
	   <STEP Action="D" IncBy="-2" Param="BEQ3_gain"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 4.2 - 7.2 kHz.">
	   <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
	   <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
	   <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
	   <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Compression:  Decrease TK in Ch 1, 2, 3, 4.">
	  <STEP Action="D" IncBy="-1" Param="C1_TK"></STEP>
	  <STEP Action="D" IncBy="-1" Param="C2_TK"></STEP>
	  <STEP Action="D" IncBy="-1" Param="C3_TK"></STEP>
	  <STEP Action="D" IncBy="-1" Param="C4_TK"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Compression:  Decrease TK in Ch 5, 6, 7, 8.">
	   <STEP Action="D" IncBy="-1" Param="C5_TK"></STEP>
	   <STEP Action="D" IncBy="-1" Param="C6_TK"></STEP>
	   <STEP Action="D" IncBy="-1" Param="C7_TK"></STEP>
	   <STEP Action="D" IncBy="-1" Param="C8_TK"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="5" Steps="1"  Action="N" Title=""></ADJUSTMENT>
    <ADJUSTMENT Row="6" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT>
    <ADJUSTMENT Row="7" Steps="1"  Action="N" Title="Enlarge vent."></ADJUSTMENT>
  </ADJUSTMENTS>
</ISSUE>
 
<ISSUE Title="Can hear but not understand / Speech is unclear">
  <ADJUSTMENTS Code="INTUITION8 Can hear but not understand / Speech is unclear">
    <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Equalizer:  Increase Gain at 1.5 - 3.5 kHz.">
      <STEP Action="I" IncBy="2" Param="BEQ4_gain"></STEP>
      <STEP Action="I" IncBy="2" Param="BEQ5_gain"></STEP>
      <STEP Action="I" IncBy="2" Param="BEQ6_gain"></STEP>
      <STEP Action="I" IncBy="2" Param="BEQ7_gain"></STEP>
    </ADJUSTMENT>
    <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500 Hz.">
      <STEP Action="D" IncBy="-2" Param="BEQ1_gain"></STEP>
      <STEP Action="D" IncBy="-2" Param="BEQ2_gain"></STEP>
    </ADJUSTMENT>
	<ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Compression: Decrease Compression Ratio in Ch 5, 6, 7, 8.">
	  <STEP Action="D" IncBy="-2" Param="C5_Ratio"></STEP>
	  <STEP Action="D" IncBy="-2" Param="C6_Ratio"></STEP>
	  <STEP Action="D" IncBy="-2" Param="C7_Ratio"></STEP>
	  <STEP Action="D" IncBy="-2" Param="C8_Ratio"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Advanced: Increase MPO.">
      <STEP Action="D" IncBy="-1" Param="MPO_level"></STEP>
    </ADJUSTMENT>
    <ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Increase Overall Gain.">
	  <STEP Action="D" IncBy="-2" Param="matrix_gain"></STEP>
    </ADJUSTMENT>
  </ADJUSTMENTS>
</ISSUE>
 
<ISSUE Title="Can hear distant sounds but not close up">
<ADJUSTMENTS Code="INTUITION8 Can hear distant sounds but not close up">
    <ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Compression: Increase TK in all channels.">
	   <STEP Action="I" IncBy="1" Param="C1_TK"></STEP>
	   <STEP Action="I" IncBy="1" Param="C2_TK"></STEP>
	   <STEP Action="I" IncBy="1" Param="C3_TK"></STEP>
	   <STEP Action="I" IncBy="1" Param="C4_TK"></STEP>
	   <STEP Action="I" IncBy="1" Param="C5_TK"></STEP>
	   <STEP Action="I" IncBy="1" Param="C6_TK"></STEP>
	   <STEP Action="I" IncBy="1" Param="C7_TK"></STEP>
	   <STEP Action="I" IncBy="1" Param="C8_TK"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Compression: Decrease Compression Ratio in Ch 1, 2, 3, 4.">
	  <STEP Action="D" IncBy="-2" Param="C1_Ratio"></STEP>
	  <STEP Action="D" IncBy="-2" Param="C2_Ratio"></STEP>
	  <STEP Action="D" IncBy="-2" Param="C3_Ratio"></STEP>
	  <STEP Action="D" IncBy="-2" Param="C4_Ratio"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Compression: Decrease Compression Ratio in Ch 5, 6, 7, 8.">
	  <STEP Action="D" IncBy="-2" Param="C5_Ratio"></STEP>
	  <STEP Action="D" IncBy="-2" Param="C6_Ratio"></STEP>
	  <STEP Action="D" IncBy="-2" Param="C7_Ratio"></STEP>
	  <STEP Action="D" IncBy="-2" Param="C8_Ratio"></STEP>
	</ADJUSTMENT>
  </ADJUSTMENTS>
</ISSUE>
 
<ISSUES Title="Own Voice">
  <ISSUE Title="Barrel/Hollow/Echo/Plugged/Occlusion">
   <ADJUSTMENTS Code="INTUITION8 Barrel/Hollow/Echo/Plugged/Occlusion">
    <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500 Hz.">
      <STEP Action="D" IncBy="-2" Param="BEQ1_gain"></STEP>
      <STEP Action="D" IncBy="-2" Param="BEQ2_gain"></STEP>
    </ADJUSTMENT>
		<ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Compression:  Increase Compression Ratio in Ch 1, 2.">
	  <STEP Action="I" IncBy="2" Param="C1_Ratio"></STEP>
	  <STEP Action="I" IncBy="2" Param="C2_Ratio"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Compression: Decrease TK in channel 1, 2, 3, 4">
	   <STEP Action="D" IncBy="-1" Param="C1_TK"></STEP>
	   <STEP Action="D" IncBy="-1" Param="C2_TK"></STEP>
	   <STEP Action="D" IncBy="-1" Param="C3_TK"></STEP>
	   <STEP Action="D" IncBy="-1" Param="C4_TK"></STEP>
	</ADJUSTMENT>
 
 
 
    	<ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Equalizer:  Increase Gain at 1.5 - 3.5 kHz.">
      	<STEP Action="I" IncBy="2" Param="BEQ4_gain"></STEP>
      	<STEP Action="I" IncBy="2" Param="BEQ5_gain"></STEP>
      	<STEP Action="I" IncBy="2" Param="BEQ6_gain"></STEP>
      <STEP Action="I" IncBy="2" Param="BEQ7_gain"></STEP>
    </ADJUSTMENT>
 
 
 
 
 
	<ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Reduce Overall Gain.">
      <STEP Action="I" IncBy="2" Param="matrix_gain"></STEP>
    </ADJUSTMENT>
    <ADJUSTMENT Row="5" Steps="3"  Action="Y" Title="Advanced: Increase MPO.">
	  <STEP Action="D" IncBy="-1" Param="MPO_level"></STEP>
    </ADJUSTMENT>
    <ADJUSTMENT Row="6" Steps="1"  Action="N" Title=""></ADJUSTMENT>
    <ADJUSTMENT Row="7" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT>
    <ADJUSTMENT Row="8" Steps="1"  Action="N" Title="Enlarge and/or step back vent."/>
	<ADJUSTMENT Row="9" Steps="1"  Action="N" Title="Taper canal."/>
	<ADJUSTMENT Row="10" Steps="1"  Action="N" Title="Remake to shorten/lengthen canal accordingly."/>
	<ADJUSTMENT Row="11" Steps="1"  Action="N" Title="Counsel."/>
   </ADJUSTMENTS>
  </ISSUE>
 
  <ISSUE Title="Tinny/Harsh/Raspy">
  <ADJUSTMENTS Code="INTUITION8 Tinny/Harsh/Raspy">
    <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Equalizer: Reduce gain at 1.5 - 4.2 kHz.">
      <STEP Action="D" IncBy="-2" Param="BEQ4_gain"></STEP>
      <STEP Action="D" IncBy="-2" Param="BEQ5_gain"></STEP>
      <STEP Action="D" IncBy="-2" Param="BEQ6_gain"></STEP>
      <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP>
      <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP>
      <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
    </ADJUSTMENT>
    <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Equalizer: Reduce gain at 4.2 - 7.2 kHz.">
      <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
      <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
      <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
      <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
    </ADJUSTMENT>
    <ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Reduce Overall Gain.">
      <STEP Action="I" IncBy="2" Param="matrix_gain"></STEP>
    </ADJUSTMENT>
    <ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Equalizer:  Increase Gain at 200, 500, 1000 Hz.">
      <STEP Action="I" IncBy="2" Param="BEQ1_gain"></STEP>
      <STEP Action="I" IncBy="2" Param="BEQ2_gain"></STEP>
      <STEP Action="I" IncBy="2" Param="BEQ3_gain"></STEP>
    </ADJUSTMENT>
  </ADJUSTMENTS>
  </ISSUE>
 
</ISSUES>
 
<ISSUES Title="Too Loud">
    <ISSUE Title="All Sounds Too Loud">
	  <ADJUSTMENTS Code="INTUITION8 All Sounds Too Loud">
		<ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Decrease Overall Gain." >
		  <STEP Action="I" IncBy="2" Param="matrix_gain"></STEP>
		</ADJUSTMENT>
        <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500 Hz.">
			<STEP Action="D" IncBy="-2" Param="BEQ1_gain"/>
			<STEP Action="D" IncBy="-2" Param="BEQ2_gain"/>
		</ADJUSTMENT>
		<ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Advanced: Decrease MPO.">
		  <STEP Action="I" IncBy="1" Param="MPO_level"></STEP>
		</ADJUSTMENT>
	  </ADJUSTMENTS>
	</ISSUE>
 
	<ISSUE Title="Loud Sounds Too Loud">
	  <ADJUSTMENTS Code="INTUITION8 Loud Sounds Too Loud">
		<ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Advanced: Decrease MPO.">
		  <STEP Action="I" IncBy="1" Param="MPO_level"></STEP>
		</ADJUSTMENT>
		<ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Compression: Increase Compression Ratio in Ch 1, 2, 3, 4." >
		  <STEP Action="I" IncBy="2" Param="C1_Ratio"></STEP>
		  <STEP Action="I" IncBy="2" Param="C2_Ratio"></STEP>
		  <STEP Action="I" IncBy="2" Param="C3_Ratio"></STEP>
		  <STEP Action="I" IncBy="2" Param="C4_Ratio"></STEP>
		</ADJUSTMENT>
		<ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Compression: Increase Compression Ratio in Ch 5, 6, 7, 8." >
		  <STEP Action="I" IncBy="2" Param="C5_Ratio"></STEP>
		  <STEP Action="I" IncBy="2" Param="C6_Ratio"></STEP>
		  <STEP Action="I" IncBy="2" Param="C7_Ratio"></STEP>
		  <STEP Action="I" IncBy="2" Param="C8_Ratio"></STEP>
		</ADJUSTMENT>
	  </ADJUSTMENTS>
	</ISSUE>
 
	<ISSUE Title="Dishes/Water/Paper Too Loud">
	  <ADJUSTMENTS Code="INTUITION8 Dishes/Water/Paper Too Loud">
		<ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Compression: Increase Compression Ratio in Ch 5, 6, 7, 8." >
		  <STEP Action="I" IncBy="2" Param="C5_Ratio"></STEP>
		  <STEP Action="I" IncBy="2" Param="C6_Ratio"></STEP>
		  <STEP Action="I" IncBy="2" Param="C7_Ratio"></STEP>
		  <STEP Action="I" IncBy="2" Param="C8_Ratio"></STEP>
		</ADJUSTMENT>
		<ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Advanced: Decrease MPO.">
		  <STEP Action="I" IncBy="1" Param="MPO_level"></STEP>
		</ADJUSTMENT>
		<ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 2.5 - 7.2 kHz.">
			<STEP Action="D" IncBy="-2" Param="BEQ6_gain"/>
			<STEP Action="D" IncBy="-2" Param="BEQ7_gain"/>
			<STEP Action="D" IncBy="-2" Param="BEQ8_gain"/>
			<STEP Action="D" IncBy="-2" Param="BEQ9_gain"/>
			<STEP Action="D" IncBy="-2" Param="BEQ10_gain"/>
			<STEP Action="D" IncBy="-2" Param="BEQ11_gain"/>
            <STEP Action="D" IncBy="-2" Param="BEQ12_gain"/>
		</ADJUSTMENT>
	  </ADJUSTMENTS>
	</ISSUE>
 
</ISSUES>
 
<ISSUES Title="Too Soft (Weak)">
	<ISSUE Title="Soft Sounds Too Soft">
	<ADJUSTMENTS Code="INTUITION8 Soft Sounds Too Soft">
		<ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Adaptive: Decrease level of Adaptive Noise Reduction.">
			<STEP Action="D" IncBy="-1" Param="Noise_Reduction"/>
		</ADJUSTMENT>
		<ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Increase Overall Gain.">
		<STEP Action="D" IncBy="-2" Param="matrix_gain"/>
		</ADJUSTMENT>
	</ADJUSTMENTS>
	</ISSUE>
	<ISSUE Title="All Sounds Too Soft">
	  <ADJUSTMENTS Code="INTUITION8 All Sounds Too Soft">
	   <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Increase Overall Gain.">
  		  <STEP Action="D" IncBy="-2" Param="matrix_gain"/>
		</ADJUSTMENT>
		<ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Advanced: Increase MPO.">
		  <STEP Action="D" IncBy="-1" Param="MPO_level"></STEP>
		</ADJUSTMENT>
		<ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Advanced: Increase Gain at 200, 500 Hz.">
		  <STEP Action="I" IncBy="2" Param="BEQ1_gain"></STEP>
		  <STEP Action="I" IncBy="2" Param="BEQ2_gain"></STEP>
		</ADJUSTMENT>
	  </ADJUSTMENTS>
	</ISSUE>
</ISSUES>
 
<ISSUE Title="Tinny/Harsh/Sharp">
  <ADJUSTMENTS Code="INTUITION8 Tinny/Harsh/Sharp">
	<ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Equalizer: Decrease Gain at 2.5 - 7.2 kHz.">
	  <STEP Action="D" IncBy="-2" Param="BEQ6_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
	</ADJUSTMENT>
    <ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Equalizer: Decrease Gain at 4.2 - 7.2 kHz.">
	  <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
	  <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Advanced: Increase Gain at 200, 500, 1000 Hz.">
	  <STEP Action="I" IncBy="2" Param="BEQ1_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ2_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ3_gain"></STEP>
	</ADJUSTMENT>
  </ADJUSTMENTS>
</ISSUE>
 
<ISSUE Title="No Perceived Benefit">
  <ADJUSTMENTS Code="INTUITION8 No Perceived Benefit">
   <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Increase Overall Gain.">
	  <STEP Action="D" IncBy="-1" Param="matrix_gain"></STEP>
	</ADJUSTMENT>
    <ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Equalizer: Increase Gain from 1.0 - 3.5 kHz.">
	  <STEP Action="I" IncBy="2" Param="BEQ3_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ4_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ5_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ6_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ7_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ8_gain"></STEP>
	</ADJUSTMENT>
	<ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Equalizer: Increase Gain at 200, 500 Hz.">
	  <STEP Action="I" IncBy="2" Param="BEQ1_gain"></STEP>
	  <STEP Action="I" IncBy="2" Param="BEQ2_gain"></STEP>
	</ADJUSTMENT>
  </ADJUSTMENTS>
</ISSUE>
 
<ISSUE Title="Pumping (Cuts In and Out)">
  <ADJUSTMENTS Code="INTUITION8 Pumping (Cuts In and Out)">
	<ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Compression: Increase TK in all channels.">
		<STEP Action="I" IncBy="1" Param="C1_TK"/>
		<STEP Action="I" IncBy="1" Param="C2_TK"/>
		<STEP Action="I" IncBy="1" Param="C3_TK"/>
		<STEP Action="I" IncBy="1" Param="C4_TK"/>
		<STEP Action="I" IncBy="1" Param="C5_TK"/>
		<STEP Action="I" IncBy="1" Param="C6_TK"/>
		<STEP Action="I" IncBy="1" Param="C7_TK"/>
		<STEP Action="I" IncBy="1" Param="C8_TK"/>
	</ADJUSTMENT>
	<ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Advanced: Increase MPO.">
	   <STEP Action="D" IncBy="-1" Param="MPO_level"></STEP>
	</ADJUSTMENT>
  </ADJUSTMENTS>
</ISSUE>
 
</CIRCUIT>
ezfit/solutions_guide/intellio.txt · Last modified: 2009/09/01 09:35 by ajdavis
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International


  • Show pagesource
  • Old revisions
  • Backlinks
  • Recent Changes
  • Media Manager
  • Sitemap