Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
ezfit:solutions_guide:intellio [2009/08/31 11:21]
ajdavis created 		ezfit:solutions_guide:intellio [2009/09/01 09:35] (current)
ajdavis
Line 10: Line 10:
  * Tips:  * Tips:
     * Check ear canal for wax/debris.     * Check ear canal for wax/debris.
 +    * Check for loose physical fit of hearing aid in concha.
     * Check receiver direction and canal length.     * Check receiver direction and canal length.
     * Reduce vent.     * Reduce vent.
Line 15: Line 16:
  
 === Background Noise === === Background Noise ===
 +  *Adaptive:  Enable Adaptive Noise Reduction.
  * Adaptive:  Increase level of Adaptive Noise Reduction.  * Adaptive:  Increase level of Adaptive Noise Reduction.
  * Equalizer:  Decrease Gain at 200 & 500 Hz.  * Equalizer:  Decrease Gain at 200 & 500 Hz.
Line 24: Line 26:
 <del> * Tips: <del> * Tips:
     * If these programming solutions are insufficient, please call Audina to discuss the value of directional microphones (if not already in use).</del> (Removed Tips and last statement: Unnecessary.  --- //[[jsudduth@audina.net|Jenny Sudduth]] 2008/09/10 12:29// )     * If these programming solutions are insufficient, please call Audina to discuss the value of directional microphones (if not already in use).</del> (Removed Tips and last statement: Unnecessary.  --- //[[jsudduth@audina.net|Jenny Sudduth]] 2008/09/10 12:29// )
 + * Tips:
 +    * For instruments with directional microphones:For instruments with directional microphones:
 + #Consider additional program with fixed cartioid input (Under Adjustments>Advanced Tab)
 +         #Consider changing primary program microphone input to fixed cartiod (Under Adjustments>Advanced Tab)
 +    * For instruments without directional microphones:
 +        If these programming solutions are insufficient,please call Support to discuss the value of directional microphones (if not already in use).
  
 === Rushing Water/Fan Noise/Static/Circuit Noise === === Rushing Water/Fan Noise/Static/Circuit Noise ===
Line 98: Line 106:
  * Equalizer: Increase Gain from 1.0 - 3.5 kHz.  * Equalizer: Increase Gain from 1.0 - 3.5 kHz.
  * Equalizer: Increase Gain at 200, 500 Hz.   * Equalizer: Increase Gain at 200, 500 Hz. 
- 
- 
 === Pumping (Cuts In and Out) === === Pumping (Cuts In and Out) ===
  * Compression: Increase TK in all channels.  * Compression: Increase TK in all channels.
Line 105: Line 111:
  * Advanced: Increase MPO.  * Advanced: Increase MPO.
  
 +Example Intuition 8 XML code modified by Barbara
 +<code XML>
 +<CIRCUIT Code="INTUITION8" Title="Instrument Model: Intuition 8">
 +<ISSUE Title="Feedback/Whistling">
 +  <ADJUSTMENTS Code="INTUITION8 Feedback/Whistling">
 + <ADJUSTMENT Row="0" Steps="1"  Action="Y" Title="Adaptive:  Activate Adaptive Feedback Canceller.">
 +   <STEP Action="S" Value="1" Param="FBC_Enable"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Advanced: Decrease MPO.">
 +   <STEP Action="I" IncBy="1" Param="MPO_level"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Equalizer:  Decrease Gain at 4.2 - 7.2 kHz.">
 +   <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="3" Steps="2"  Action="Y" Title="Equalizer:  Decrease Gain at 2.5 - 3.5 kHz.">
 +   <STEP Action="D" IncBy="-2" Param="BEQ6_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 3.0 - 7.2 kHz.">
 +   <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="5" Steps="3"  Action="Y" Title="Decrease Overall Gain.">
 + <STEP Action="I" IncBy="2" Param="matrix_gain"/>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="6" Steps="1"  Action="N" Title=""></ADJUSTMENT>
 + <ADJUSTMENT Row="7" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT>
 + <ADJUSTMENT Row="8" Steps="1"  Action="N" Title="Check ear canal for wax/debris."/>
 + <ADJUSTMENT Row="9" Steps="1"  Action="N" Title="Check for loose physical fit."/>
 + <ADJUSTMENT Row="10" Steps="1"  Action="N" Title="Check receiver direction and canal length."/>
 + <ADJUSTMENT Row="11" Steps="1"  Action="N" Title="Reduce vent."/>
 +  </ADJUSTMENTS>
 +</ISSUE>
 +<ISSUE Title="Background Noise">
 +  <ADJUSTMENTS Code="INTUITION8 Background Noise">
 +
 +
 +
 +    <ADJUSTMENT Row="0" Steps="1"  Action="Y" Title="Adaptive:  Activate Adaptive Noise Reduction.">
 +   <STEP Action="S" Value="1" Param="Noise_Reduction_Enable"></STEP>
 +
 +
 +
 + </ADJUSTMENT>
 +    <ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Adaptive:  Increase level of Adaptive Noise Reduction.">
 +      <STEP Action="I" IncBy="1" Param="Noise_Reduction"></STEP>
 +    </ADJUSTMENT>
 +    <ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500 Hz.">
 +      <STEP Action="D" IncBy="-2" Param="BEQ1_gain"></STEP>
 +      <STEP Action="D" IncBy="-2" Param="BEQ2_gain"></STEP>
 +    </ADJUSTMENT>
 + <ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Advanced: Decrease MPO.">
 +   <STEP Action="I" IncBy="1" Param="MPO_level"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="4" Steps="2"  Action="Y" Title="Compression:  Increase Compression Ratio in Ch 1, 2, 3.">
 +    <STEP Action="I" IncBy="2" Param="C1_Ratio"></STEP>
 +    <STEP Action="I" IncBy="2" Param="C2_Ratio"></STEP>
 +    <STEP Action="I" IncBy="2" Param="C3_Ratio"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="5" Steps="2"  Action="Y" Title="Compression: Increase TK in Ch 1, 2, 3.">
 +    <STEP Action="I" IncBy="1" Param="C1_TK"></STEP>
 +    <STEP Action="I" IncBy="1" Param="C2_TK"></STEP>
 +    <STEP Action="I" IncBy="1" Param="C3_TK"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="6" Steps="3"  Action="Y" Title="Equalizer:  Increase Gain at 1.5 - 3.5 kHz">
 +   <STEP Action="I" IncBy="2" Param="BEQ4_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ5_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ6_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ7_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ8_gain"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="7" Steps="3"  Action="Y" Title="Decrease Overall Gain.">
 + <STEP Action="I" IncBy="2" Param="matrix_gain"/>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="8" Steps="1"  Action="N" Title=""></ADJUSTMENT>
 + <ADJUSTMENT Row="9" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT>
 + <ADJUSTMENT Row="10" Steps="1"  Action="N" Title="For instruments with directional microphones:"></ADJUSTMENT>
 + <ADJUSTMENT Row="11" Steps="1"  Action="N" Title="1. Consider additional program with fixed"></ADJUSTMENT>
 + <ADJUSTMENT Row="12" Steps="1"  Action="N" Title="   cartioid input (Under Adjustments>Advanced Tab)"></ADJUSTMENT>
 + <ADJUSTMENT Row="13" Steps="1"  Action="N" Title="2. Consider changing program microphone input to fixed"></ADJUSTMENT>
 + <ADJUSTMENT Row="14" Steps="1"  Action="N" Title="   cartiod polar(Under Adjustments>Advanced Tab)"></ADJUSTMENT>
 + 
 + <ADJUSTMENT Row="15" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT>
 + <ADJUSTMENT Row="16" Steps="1"  Action="N" Title="For instruments without directional microphones:"></ADJUSTMENT>
 + <ADJUSTMENT Row="17" Steps="1"  Action="N" Title="If these programming solutions are insufficient, "></ADJUSTMENT>
 + <ADJUSTMENT Row="18" Steps="1"  Action="N" Title="please call Support to discuss the value of"></ADJUSTMENT>
 + <ADJUSTMENT Row="19" Steps="1"  Action="N" Title="directional microphones (if not already in use)."></ADJUSTMENT>
 +  </ADJUSTMENTS>
 +</ISSUE>
 +<ISSUE Title="Rushing Water/Fan Noise/Static/Circuit Noise">
 +  <ADJUSTMENTS Code="INTUITION8 Rushing Water/Fan Noise/Static/Circuit Noise">
 +
 +
 + <ADJUSTMENT Row="0" Steps="1"  Action="Y" Title="Adaptive:  Activate Adaptive Noise Reduction.">
 +   <STEP Action="S" Value="1" Param="Noise_Reduction_Enable"></STEP>
 +
 +
 + <ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Adaptive:  Increase level of Adaptive Noise Reduction.">
 +   <STEP Action="I" IncBy="1" Param="Noise_Reduction"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500, 1000 Hz.">
 +    <STEP Action="D" IncBy="-2" Param="BEQ1_gain"></STEP>
 +    <STEP Action="D" IncBy="-2" Param="BEQ2_gain"></STEP>
 +    <STEP Action="D" IncBy="-2" Param="BEQ3_gain"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 4.2 - 7.2 kHz.">
 +    <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
 +    <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
 +    <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
 +    <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Compression:  Decrease TK in Ch 1, 2, 3, 4.">
 +   <STEP Action="D" IncBy="-1" Param="C1_TK"></STEP>
 +   <STEP Action="D" IncBy="-1" Param="C2_TK"></STEP>
 +   <STEP Action="D" IncBy="-1" Param="C3_TK"></STEP>
 +   <STEP Action="D" IncBy="-1" Param="C4_TK"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Compression:  Decrease TK in Ch 5, 6, 7, 8.">
 +    <STEP Action="D" IncBy="-1" Param="C5_TK"></STEP>
 +    <STEP Action="D" IncBy="-1" Param="C6_TK"></STEP>
 +    <STEP Action="D" IncBy="-1" Param="C7_TK"></STEP>
 +    <STEP Action="D" IncBy="-1" Param="C8_TK"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="5" Steps="1"  Action="N" Title=""></ADJUSTMENT>
 +    <ADJUSTMENT Row="6" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT>
 +    <ADJUSTMENT Row="7" Steps="1"  Action="N" Title="Enlarge vent."></ADJUSTMENT>
 +  </ADJUSTMENTS>
 +</ISSUE>
 + 
 +<ISSUE Title="Can hear but not understand / Speech is unclear">
 +  <ADJUSTMENTS Code="INTUITION8 Can hear but not understand / Speech is unclear">
 +    <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Equalizer:  Increase Gain at 1.5 - 3.5 kHz.">
 +      <STEP Action="I" IncBy="2" Param="BEQ4_gain"></STEP>
 +      <STEP Action="I" IncBy="2" Param="BEQ5_gain"></STEP>
 +      <STEP Action="I" IncBy="2" Param="BEQ6_gain"></STEP>
 +      <STEP Action="I" IncBy="2" Param="BEQ7_gain"></STEP>
 +    </ADJUSTMENT>
 +    <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500 Hz.">
 +      <STEP Action="D" IncBy="-2" Param="BEQ1_gain"></STEP>
 +      <STEP Action="D" IncBy="-2" Param="BEQ2_gain"></STEP>
 +    </ADJUSTMENT>
 + <ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Compression: Decrease Compression Ratio in Ch 5, 6, 7, 8.">
 +   <STEP Action="D" IncBy="-2" Param="C5_Ratio"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="C6_Ratio"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="C7_Ratio"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="C8_Ratio"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Advanced: Increase MPO.">
 +      <STEP Action="D" IncBy="-1" Param="MPO_level"></STEP>
 +    </ADJUSTMENT>
 +    <ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Increase Overall Gain.">
 +   <STEP Action="D" IncBy="-2" Param="matrix_gain"></STEP>
 +    </ADJUSTMENT>
 +  </ADJUSTMENTS>
 +</ISSUE>
 + 
 +<ISSUE Title="Can hear distant sounds but not close up">
 +<ADJUSTMENTS Code="INTUITION8 Can hear distant sounds but not close up">
 +    <ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Compression: Increase TK in all channels.">
 +    <STEP Action="I" IncBy="1" Param="C1_TK"></STEP>
 +    <STEP Action="I" IncBy="1" Param="C2_TK"></STEP>
 +    <STEP Action="I" IncBy="1" Param="C3_TK"></STEP>
 +    <STEP Action="I" IncBy="1" Param="C4_TK"></STEP>
 +    <STEP Action="I" IncBy="1" Param="C5_TK"></STEP>
 +    <STEP Action="I" IncBy="1" Param="C6_TK"></STEP>
 +    <STEP Action="I" IncBy="1" Param="C7_TK"></STEP>
 +    <STEP Action="I" IncBy="1" Param="C8_TK"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Compression: Decrease Compression Ratio in Ch 1, 2, 3, 4.">
 +   <STEP Action="D" IncBy="-2" Param="C1_Ratio"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="C2_Ratio"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="C3_Ratio"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="C4_Ratio"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Compression: Decrease Compression Ratio in Ch 5, 6, 7, 8.">
 +   <STEP Action="D" IncBy="-2" Param="C5_Ratio"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="C6_Ratio"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="C7_Ratio"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="C8_Ratio"></STEP>
 + </ADJUSTMENT>
 +  </ADJUSTMENTS>
 +</ISSUE>
 + 
 +<ISSUES Title="Own Voice">
 +  <ISSUE Title="Barrel/Hollow/Echo/Plugged/Occlusion">
 +   <ADJUSTMENTS Code="INTUITION8 Barrel/Hollow/Echo/Plugged/Occlusion">
 +    <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500 Hz.">
 +      <STEP Action="D" IncBy="-2" Param="BEQ1_gain"></STEP>
 +      <STEP Action="D" IncBy="-2" Param="BEQ2_gain"></STEP>
 +    </ADJUSTMENT>
 + <ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Compression:  Increase Compression Ratio in Ch 1, 2.">
 +   <STEP Action="I" IncBy="2" Param="C1_Ratio"></STEP>
 +   <STEP Action="I" IncBy="2" Param="C2_Ratio"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Compression: Decrease TK in channel 1, 2, 3, 4">
 +    <STEP Action="D" IncBy="-1" Param="C1_TK"></STEP>
 +    <STEP Action="D" IncBy="-1" Param="C2_TK"></STEP>
 +    <STEP Action="D" IncBy="-1" Param="C3_TK"></STEP>
 +    <STEP Action="D" IncBy="-1" Param="C4_TK"></STEP>
 + </ADJUSTMENT>
 +
 +
 +
 +    <ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Equalizer:  Increase Gain at 1.5 - 3.5 kHz.">
 +      <STEP Action="I" IncBy="2" Param="BEQ4_gain"></STEP>
 +      <STEP Action="I" IncBy="2" Param="BEQ5_gain"></STEP>
 +      <STEP Action="I" IncBy="2" Param="BEQ6_gain"></STEP>
 +      <STEP Action="I" IncBy="2" Param="BEQ7_gain"></STEP>
 +    </ADJUSTMENT>
 +
 +
 +
 +
 +
 + <ADJUSTMENT Row="4" Steps="3"  Action="Y" Title="Reduce Overall Gain.">
 +      <STEP Action="I" IncBy="2" Param="matrix_gain"></STEP>
 +    </ADJUSTMENT>
 +    <ADJUSTMENT Row="5" Steps="3"  Action="Y" Title="Advanced: Increase MPO.">
 +   <STEP Action="D" IncBy="-1" Param="MPO_level"></STEP>
 +    </ADJUSTMENT>
 +    <ADJUSTMENT Row="6" Steps="1"  Action="N" Title=""></ADJUSTMENT>
 +    <ADJUSTMENT Row="7" Steps="1"  Action="N" Title="TIPS"></ADJUSTMENT>
 +    <ADJUSTMENT Row="8" Steps="1"  Action="N" Title="Enlarge and/or step back vent."/>
 + <ADJUSTMENT Row="9" Steps="1"  Action="N" Title="Taper canal."/>
 + <ADJUSTMENT Row="10" Steps="1"  Action="N" Title="Remake to shorten/lengthen canal accordingly."/>
 + <ADJUSTMENT Row="11" Steps="1"  Action="N" Title="Counsel."/>
 +   </ADJUSTMENTS>
 +  </ISSUE>
 + 
 +  <ISSUE Title="Tinny/Harsh/Raspy">
 +  <ADJUSTMENTS Code="INTUITION8 Tinny/Harsh/Raspy">
 +    <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Equalizer: Reduce gain at 1.5 - 4.2 kHz.">
 +      <STEP Action="D" IncBy="-2" Param="BEQ4_gain"></STEP>
 +      <STEP Action="D" IncBy="-2" Param="BEQ5_gain"></STEP>
 +      <STEP Action="D" IncBy="-2" Param="BEQ6_gain"></STEP>
 +      <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP>
 +      <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP>
 +      <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
 +    </ADJUSTMENT>
 +    <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Equalizer: Reduce gain at 4.2 - 7.2 kHz.">
 +      <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
 +      <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
 +      <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
 +      <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
 +    </ADJUSTMENT>
 +    <ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Reduce Overall Gain.">
 +      <STEP Action="I" IncBy="2" Param="matrix_gain"></STEP>
 +    </ADJUSTMENT>
 +    <ADJUSTMENT Row="3" Steps="3"  Action="Y" Title="Equalizer:  Increase Gain at 200, 500, 1000 Hz.">
 +      <STEP Action="I" IncBy="2" Param="BEQ1_gain"></STEP>
 +      <STEP Action="I" IncBy="2" Param="BEQ2_gain"></STEP>
 +      <STEP Action="I" IncBy="2" Param="BEQ3_gain"></STEP>
 +    </ADJUSTMENT>
 +  </ADJUSTMENTS>
 +  </ISSUE>
 + 
 +</ISSUES>
 + 
 +<ISSUES Title="Too Loud">
 +    <ISSUE Title="All Sounds Too Loud">
 +   <ADJUSTMENTS Code="INTUITION8 All Sounds Too Loud">
 + <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Decrease Overall Gain." >
 +   <STEP Action="I" IncBy="2" Param="matrix_gain"></STEP>
 + </ADJUSTMENT>
 +        <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 200, 500 Hz.">
 + <STEP Action="D" IncBy="-2" Param="BEQ1_gain"/>
 + <STEP Action="D" IncBy="-2" Param="BEQ2_gain"/>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Advanced: Decrease MPO.">
 +   <STEP Action="I" IncBy="1" Param="MPO_level"></STEP>
 + </ADJUSTMENT>
 +   </ADJUSTMENTS>
 + </ISSUE>
 + 
 + <ISSUE Title="Loud Sounds Too Loud">
 +   <ADJUSTMENTS Code="INTUITION8 Loud Sounds Too Loud">
 + <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Advanced: Decrease MPO.">
 +   <STEP Action="I" IncBy="1" Param="MPO_level"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Compression: Increase Compression Ratio in Ch 1, 2, 3, 4." >
 +   <STEP Action="I" IncBy="2" Param="C1_Ratio"></STEP>
 +   <STEP Action="I" IncBy="2" Param="C2_Ratio"></STEP>
 +   <STEP Action="I" IncBy="2" Param="C3_Ratio"></STEP>
 +   <STEP Action="I" IncBy="2" Param="C4_Ratio"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Compression: Increase Compression Ratio in Ch 5, 6, 7, 8." >
 +   <STEP Action="I" IncBy="2" Param="C5_Ratio"></STEP>
 +   <STEP Action="I" IncBy="2" Param="C6_Ratio"></STEP>
 +   <STEP Action="I" IncBy="2" Param="C7_Ratio"></STEP>
 +   <STEP Action="I" IncBy="2" Param="C8_Ratio"></STEP>
 + </ADJUSTMENT>
 +   </ADJUSTMENTS>
 + </ISSUE>
 + 
 + <ISSUE Title="Dishes/Water/Paper Too Loud">
 +   <ADJUSTMENTS Code="INTUITION8 Dishes/Water/Paper Too Loud">
 + <ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Compression: Increase Compression Ratio in Ch 5, 6, 7, 8." >
 +   <STEP Action="I" IncBy="2" Param="C5_Ratio"></STEP>
 +   <STEP Action="I" IncBy="2" Param="C6_Ratio"></STEP>
 +   <STEP Action="I" IncBy="2" Param="C7_Ratio"></STEP>
 +   <STEP Action="I" IncBy="2" Param="C8_Ratio"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Advanced: Decrease MPO.">
 +   <STEP Action="I" IncBy="1" Param="MPO_level"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Equalizer:  Decrease Gain at 2.5 - 7.2 kHz.">
 + <STEP Action="D" IncBy="-2" Param="BEQ6_gain"/>
 + <STEP Action="D" IncBy="-2" Param="BEQ7_gain"/>
 + <STEP Action="D" IncBy="-2" Param="BEQ8_gain"/>
 + <STEP Action="D" IncBy="-2" Param="BEQ9_gain"/>
 + <STEP Action="D" IncBy="-2" Param="BEQ10_gain"/>
 + <STEP Action="D" IncBy="-2" Param="BEQ11_gain"/>
 +            <STEP Action="D" IncBy="-2" Param="BEQ12_gain"/>
 + </ADJUSTMENT>
 +   </ADJUSTMENTS>
 + </ISSUE>
 + 
 +</ISSUES>
 + 
 +<ISSUES Title="Too Soft (Weak)">
 + <ISSUE Title="Soft Sounds Too Soft">
 + <ADJUSTMENTS Code="INTUITION8 Soft Sounds Too Soft">
 + <ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Adaptive: Decrease level of Adaptive Noise Reduction.">
 + <STEP Action="D" IncBy="-1" Param="Noise_Reduction"/>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Increase Overall Gain.">
 + <STEP Action="D" IncBy="-2" Param="matrix_gain"/>
 + </ADJUSTMENT>
 + </ADJUSTMENTS>
 + </ISSUE>
 + <ISSUE Title="All Sounds Too Soft">
 +   <ADJUSTMENTS Code="INTUITION8 All Sounds Too Soft">
 +    <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Increase Overall Gain.">
 +    <STEP Action="D" IncBy="-2" Param="matrix_gain"/>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Advanced: Increase MPO.">
 +   <STEP Action="D" IncBy="-1" Param="MPO_level"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Advanced: Increase Gain at 200, 500 Hz.">
 +   <STEP Action="I" IncBy="2" Param="BEQ1_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ2_gain"></STEP>
 + </ADJUSTMENT>
 +   </ADJUSTMENTS>
 + </ISSUE>
 +</ISSUES>
 + 
 +<ISSUE Title="Tinny/Harsh/Sharp">
 +  <ADJUSTMENTS Code="INTUITION8 Tinny/Harsh/Sharp">
 + <ADJUSTMENT Row="0" Steps="2"  Action="Y" Title="Equalizer: Decrease Gain at 2.5 - 7.2 kHz.">
 +   <STEP Action="D" IncBy="-2" Param="BEQ6_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ7_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ8_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
 + </ADJUSTMENT>
 +    <ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Equalizer: Decrease Gain at 4.2 - 7.2 kHz.">
 +   <STEP Action="D" IncBy="-2" Param="BEQ9_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ10_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ11_gain"></STEP>
 +   <STEP Action="D" IncBy="-2" Param="BEQ12_gain"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="2" Steps="3"  Action="Y" Title="Advanced: Increase Gain at 200, 500, 1000 Hz.">
 +   <STEP Action="I" IncBy="2" Param="BEQ1_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ2_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ3_gain"></STEP>
 + </ADJUSTMENT>
 +  </ADJUSTMENTS>
 +</ISSUE>
 + 
 +<ISSUE Title="No Perceived Benefit">
 +  <ADJUSTMENTS Code="INTUITION8 No Perceived Benefit">
 +   <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Increase Overall Gain.">
 +   <STEP Action="D" IncBy="-1" Param="matrix_gain"></STEP>
 + </ADJUSTMENT>
 +    <ADJUSTMENT Row="1" Steps="2"  Action="Y" Title="Equalizer: Increase Gain from 1.0 - 3.5 kHz.">
 +   <STEP Action="I" IncBy="2" Param="BEQ3_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ4_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ5_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ6_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ7_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ8_gain"></STEP>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="2" Steps="2"  Action="Y" Title="Equalizer: Increase Gain at 200, 500 Hz.">
 +   <STEP Action="I" IncBy="2" Param="BEQ1_gain"></STEP>
 +   <STEP Action="I" IncBy="2" Param="BEQ2_gain"></STEP>
 + </ADJUSTMENT>
 +  </ADJUSTMENTS>
 +</ISSUE>
 + 
 +<ISSUE Title="Pumping (Cuts In and Out)">
 +  <ADJUSTMENTS Code="INTUITION8 Pumping (Cuts In and Out)">
 + <ADJUSTMENT Row="0" Steps="3"  Action="Y" Title="Compression: Increase TK in all channels.">
 + <STEP Action="I" IncBy="1" Param="C1_TK"/>
 + <STEP Action="I" IncBy="1" Param="C2_TK"/>
 + <STEP Action="I" IncBy="1" Param="C3_TK"/>
 + <STEP Action="I" IncBy="1" Param="C4_TK"/>
 + <STEP Action="I" IncBy="1" Param="C5_TK"/>
 + <STEP Action="I" IncBy="1" Param="C6_TK"/>
 + <STEP Action="I" IncBy="1" Param="C7_TK"/>
 + <STEP Action="I" IncBy="1" Param="C8_TK"/>
 + </ADJUSTMENT>
 + <ADJUSTMENT Row="1" Steps="3"  Action="Y" Title="Advanced: Increase MPO.">
 +    <STEP Action="D" IncBy="-1" Param="MPO_level"></STEP>
 + </ADJUSTMENT>
 +  </ADJUSTMENTS>
 +</ISSUE>
 + 
 +</CIRCUIT>
 +</code>
ezfit/solutions_guide/intellio.1251732107.txt.gz ยท Last modified: 2009/08/31 11:21 by ajdavis
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International


  • Show page
  • Old revisions
  • Backlinks
  • Recent Changes
  • Media Manager
  • Sitemap