This is an old revision of the document!
Test Protocol
Test 1: Automated Test Cases
- Run ezFITLiteClient.
- Start Optimizer Server.
- Set Serial Number, Device ID, and Audiogram (to 40 dB flat symmetrical loss).
- Run Unit Test.
- Open Log and analyze it.
Test 2: Ad Hoc Tests
- Run ezFITLiteClient.
- Start Optimizer Server.
- Set Serial Number, Device ID, and Audiogram (to 40 dB flat symmetrical loss).
- Perform the following operations:
- Set Baseline60.
- Change Bump, Tilt, and/or Gain.
- Apply Settings.
- Set Baseline80.
- Change Bump, Tilt, and/or Gain.
- Apply Settings.
- Set Output60 and Output80.
- Set Compression.
- Open Log and analyze it.
- Repeate the previous steps as many times as necessary.
Test 3: Standard Test
- Run ezFIT.
- Create a Patient record with 2 identical audiograms, 40 dB flat loss.
- Read hearing instruments (both) with ezFIT.
- Perform standard “Normal (WDRC)” autofit for both instruments.
- Perform Clarujust autofit for both instruments.
- Program the hearing instruments.
- Open Log and analyze it. In ezFIT, Tools > ezControl Center. In the new screen, Log > ezFIT Optimizer.