Differences

This shows you the differences between two versions of the page.

--- ezfit:clarujust:ezfit_optimizer_clarujust_test_protocol [2010/03/02 15:25]
smayr
+++ ezfit:clarujust:ezfit_optimizer_clarujust_test_protocol [2010/03/02 18:09] (current)
smayr
@@ Line 1: / Line 1: @@
-== Test Protocol ==
+== ezFIT Optimizer (for Clarujust) Test Protocol ==
 === Test 1: Automated Test Cases ===
   * Run ezFITLiteClient.
   * Start Optimizer Server.
-  * Set Serial Number, Device ID, and Audiogram (to 40 dB flat symmetrical loss).
+  * Set Serial Number, Device ID, and Audiogram (40 dB flat symmetrical hearing loss).
   * Run Unit Test.
   * Open Log and analyze it.
 === Test 2: Ad Hoc Tests ===
   * Run ezFITLiteClient.
   * Start Optimizer Server.
-  * Set Serial Number, Device ID, and Audiogram (to 40 dB flat loss for both ears).
+  * Set Serial Number, Device ID, and Audiogram (40 dB flat symmetrical hearing loss).
   * Perform the following operations:
       * Set Baseline60.
@@ Line 23: / Line 22: @@
       * Set Compression.
   * Open Log and analyze it.
-  * Repeate the previous steps as many times as necessary.
+  * Repeat the previous steps as many times as necessary, with variations to Bump, Tilt, and Gain.
-=== Test 3: Standard Test ===
+=== Test 3: Application Test ===
   * Run ezFIT.
-  * Create a Patient record with 2 identical audiograms, 40 dB flat loss.
+  * Create a Patient record with audiograms (40 dB flat symmetrical hearing loss).
   * Read hearing instruments (both) with ezFIT.
   * Perform standard "Normal (WDRC)" autofit for both instruments.
@@ Line 34: / Line 33: @@
   * Program the hearing instruments.
   * Open Log and analyze it. In ezFIT, Tools > ezControl Center.  In the new screen, Log > ezFIT Optimizer.
+=== Test 4: Verifit Test ===
+  * Analyze hearing instrument with Verifit analyzer.