Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
ezfit:clarujust:ezfit_optimizer_clarujust_test_protocol [2010/03/02 14:09] smayr created |
ezfit:clarujust:ezfit_optimizer_clarujust_test_protocol [2010/03/02 18:09] (current) smayr |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | == Test Protocol == | + | == ezFIT Optimizer (for Clarujust) |
- | + | === Test 1: Automated Test Cases === | |
- | === Test 1 === | + | |
* Run ezFITLiteClient. | * Run ezFITLiteClient. | ||
* Start Optimizer Server. | * Start Optimizer Server. | ||
- | * Set Serial Number, Device ID, and Audiogram (to 40 dB flat loss for both ears). | + | * Set Serial Number, Device ID, and Audiogram (40 dB flat symmetrical hearing |
* Run Unit Test. | * Run Unit Test. | ||
* Open Log and analyze it. | * Open Log and analyze it. | ||
- | + | === Test 2: Ad Hoc Tests === | |
- | === Test 2 === | + | |
* Run ezFITLiteClient. | * Run ezFITLiteClient. | ||
* Start Optimizer Server. | * Start Optimizer Server. | ||
- | * Set Serial Number, Device ID, and Audiogram (to 40 dB flat loss for both ears). | + | * Set Serial Number, Device ID, and Audiogram (40 dB flat symmetrical hearing |
- | * Run Unit Test. | + | * Perform the following operations: |
+ | * Set Baseline60. | ||
+ | * Change Bump, Tilt, and/or Gain. | ||
+ | * Apply Settings. | ||
+ | * Set Baseline80. | ||
+ | * Change Bump, Tilt, and/or Gain. | ||
+ | * Apply Settings. | ||
+ | * Set Output60 and Output80. | ||
+ | * Set Compression. | ||
* Open Log and analyze it. | * Open Log and analyze it. | ||
+ | * Repeat the previous steps as many times as necessary, with variations to Bump, Tilt, and Gain. | ||
- | === Test 3 === | + | === Test 3: Application Test === |
* Run ezFIT. | * Run ezFIT. | ||
- | * Create a Patient record with 2 identical | + | * Create a Patient record with audiograms |
* Read hearing instruments (both) with ezFIT. | * Read hearing instruments (both) with ezFIT. | ||
* Perform standard " | * Perform standard " | ||
Line 27: | Line 34: | ||
* Open Log and analyze it. In ezFIT, Tools > ezControl Center. | * Open Log and analyze it. In ezFIT, Tools > ezControl Center. | ||
+ | === Test 4: Verifit Test === | ||
+ | * Analyze hearing instrument with Verifit analyzer. |