|
|
|
ezfit:4x:to_do_list [2013/10/15 17:21]
smayr created |
ezfit:4x:to_do_list [2013/10/15 17:22] (current)
smayr |
| == ezFIT 4 To Do List == | == ezFIT 4 To Do List == |
| |
| == ezFIT == | |
| * <del>For Intricon products, fix Tone reference range for each Input Reference and Output Reference. Each has different ranges.</del> --- //[[smayr@audina.net|Siegwart Mayr]] 2009/07/07 16:03// | * <del>For Intricon products, fix Tone reference range for each Input Reference and Output Reference. Each has different ranges.</del> --- //[[smayr@audina.net|Siegwart Mayr]] 2009/07/07 16:03// |
| * <del>For Intricon products, in Recommended External VC % in Autofit tab (remove this control in favor of the following): | * <del>For Intricon products, in Recommended External VC % in Autofit tab (remove this control in favor of the following): |
| * <del>Add Configuration Utility to recalibrate Foundation and BTE 478P products to work with new single-use DLLs.</del> --- //[[joel@audina.net|Joel Jn-Francois]] 2009/09/17 16:44// | * <del>Add Configuration Utility to recalibrate Foundation and BTE 478P products to work with new single-use DLLs.</del> --- //[[joel@audina.net|Joel Jn-Francois]] 2009/09/17 16:44// |
| |
| == ezHIT == | |
| * <del>Add support for Frye Fonix 7000. (for Glenn)</del> --- //[[smayr@audina.net|Siegwart Mayr]] 2009/07/07 09:36// | |
| * <del>Add button to change to Telecoil memory during ANSI96 test. (for Dale)</del> --- //[[smayr@audina.net|Siegwart Mayr]] 2009/07/07 09:36// | |
| * <del>Support for Private Label (i.e. Auditiva) reports. (Guillermo)</del> --- //[[smayr@audina.net|Siegwart Mayr]] 2009/07/09 15:24// | |
| * <del>Bug: Check Measured Ref Test Gain (RTG). It is not adjusting. It should be within + or - 1.5 dB from Target RTG.</del> --- //[[smayr@audina.net|Siegwart Mayr]] 2009/08/07 15:17// | |
| * <del>Bug: Settings > General > Private label = No Label, should default to no logo in final report.</del> --- //[[smayr@audina.net|Siegwart Mayr]] 2009/08/07 15:17// | |
| * <del>Add Directional Mic Calibration support. (for Dale)</del> --- //[[smayr@audina.net|Siegwart Mayr]] 2009/07/20 11:50// | |
| * <del>Detect feedback before starting ANSI96 test. | |
| * Spectrum Mode (press 0/60 button), to set Source Off. | |
| * Read RMS Out. RMS = Root Mean Square | |
| * If input/output reference number (RMS Out) > 65 dB, we have feedback, else test passed. (Glenn)</del> --- //[[smayr@audina.net|Siegwart Mayr]] 2009/08/11 13:13// | |
| * <del>Bug: Allow ANSI96 test to enable/disable battery drain when using Fonix 7000.</del> --- //[[smayr@audina.net|Siegwart Mayr]] 2009/08/11 13:13// | |
| * <del>Report file name (report title when sending to printer) should include product and serial number, to simplify saving PDF files. </del> --- //[[smayr@audina.net|Siegwart Mayr]] 2009/09/17 16:45// | |