Differences

This shows you the differences between two versions of the page.

--- ezfit:software_and_driver_installation [2009/05/18 16:40]
smayr
+++ ezfit:software_and_driver_installation [2014/01/16 10:58] (current)
smayr
@@ Line 1: / Line 1: @@
 ==Installation Requirements==
+=== 2014 ===
+===Hardware===
+* 1.6 GHz Processor.
+* 2 GB of RAM.
+* Serial port or USB port (when using a USB port, you also need a USB-Serial Adapter to connect to a Hi-Pro programming box).
+* 250 MB of free hard disk space.
+===Software===
+* Windows XP-SP3/2003/Vista/2008/7/8 (Professional or Server) for the server installation.
+* Windows XP-SP3/Vista/7/8 for the client installation.
+* Drivers for USB-Serial Adapter (if using a USB serial port to connect to a Hi-Pro programming box).
+=== 4.x ===
 ===Hardware===
 * 900 MHz Processor.
@@ Line 175: / Line 188: @@
 >Make sure you do not connect the DSP programmer before installing the ARKbase software. If you do, then disconnect it and cancel the  Windows auto-detection of new hardware. You might need to go to Control Panel > System > Harware > Device Manager to remove it from "Other Devices".  This category contains all the devices detected but not yet installed, usually due to lack of drivers.  Reboot after this and proceed with driver installation as outlined above.