ezfit:clarujust:ezfit_optimizer_clarujust_test

Run ezFITLiteClient.
Start Optimizer Server.
Set Serial Number, Device ID, and Audiogram (40 dB flat symmetrical hearing loss).
Run Unit Test.
Open Log and analyze it.

Run ezFITLiteClient.
Start Optimizer Server.
Set Serial Number, Device ID, and Audiogram (40 dB flat symmetrical hearing loss).
Perform the following operations:
- Set Baseline60.
- Change Bump, Tilt, and/or Gain.
- Apply Settings.
- Set Baseline80.
- Change Bump, Tilt, and/or Gain.
- Apply Settings.
- Set Output60 and Output80.
- Set Compression.
Open Log and analyze it.
Repeat the previous steps as many times as necessary, with variations to Bump, Tilt, and Gain.

Run ezFIT.
Create a Patient record with audiograms (40 dB flat symmetrical hearing loss).
Read hearing instruments (both) with ezFIT.
Perform standard “Normal (WDRC)” autofit for both instruments.
Perform Clarujust autofit for both instruments.
Program the hearing instruments.
Open Log and analyze it. In ezFIT, Tools > ezControl Center. In the new screen, Log > ezFIT Optimizer.