== ezHIT 1.x (using ezFIT 4.x libraries) ==
 * <del>Add support for Frye Fonix 7000. (for Glenn)</del>  --- //[[smayr@audina.net|Siegwart Mayr]] 2009/07/07 09:36//
 * <del>Add button to change to Telecoil memory during ANSI96 test. (for Dale)</del>  --- //[[smayr@audina.net|Siegwart Mayr]] 2009/07/07 09:36//
 * <del>Support for Private Label (i.e. Auditiva) reports. (Guillermo)</del>   --- //[[smayr@audina.net|Siegwart Mayr]] 2009/07/09 15:24//
 * <del>Bug: Check Measured Ref Test Gain (RTG).  It is not adjusting.  It should be within + or - 1.5 dB from Target RTG.</del>  --- //[[smayr@audina.net|Siegwart Mayr]] 2009/08/07 15:17//
 * <del>Bug: Settings > General > Private label = No Label, should default to no logo in final report.</del>  --- //[[smayr@audina.net|Siegwart Mayr]] 2009/08/07 15:17//
 * <del>Add Directional Mic Calibration support. (for Dale)</del>   --- //[[smayr@audina.net|Siegwart Mayr]] 2009/07/20 11:50// 
 * <del>Detect feedback before starting ANSI96 test.  
   * Spectrum Mode (press 0/60 button), to set Source Off.
   * Read RMS Out. RMS = Root Mean Square
   * If input/output reference number (RMS Out) > 65 dB, we have feedback, else test passed. (Glenn)</del>  --- //[[smayr@audina.net|Siegwart Mayr]] 2009/08/11 13:13//
 * <del>Bug: Allow ANSI96 test to enable/disable battery drain when using Fonix 7000.</del>  --- //[[smayr@audina.net|Siegwart Mayr]] 2009/08/11 13:13//
 * <del>Report file name (report title when sending to printer) should include product and serial number, to simplify saving PDF files. </del>  --- //[[smayr@audina.net|Siegwart Mayr]] 2009/09/17 16:45//