== Solutions Guide: Intuition 2FC / Sparo 2 ==

=== Feedback/Whistling ===
  * Adaptive:  Activate Adaptive Feedback Canceller.
  * Equalizer:  Decrease Gain at 2.5 - 3.5 kHz.
  * Equalizer:  Decrease Gain at 4.2 - 7.2 kHz.
  * Equalizer:  Decrease Gain at 3.0 - 7.2 kHz.
  * Decrease overall Gain.
  * Tips:
    * Check ear canal for wax/debris.
    * Check receiver direction and canal length.
    * Reduce vent.

=== Background Noise ===
  * Advanced: Enable expansion.
  * Equalizer:  Decrease Gain at 200, 500 Hz.
  * Compression:  Increase Compression Ratio in Ch 1.
  * Equalizer:  Increase Gain at 1.5 - 3 kHz.
  * Decrease overall Gain.
  * Tips:
     * If these programming solutions are insufficient, please call Audina to discuss the value of directional microphones (if not already in use).

=== Rushing Water/Fan Noise/Static/Circuit Noise ===
  * Advanced: Enable expansion.
  * Equalizer:  Decrease Gain at 200, 500, 1000 Hz.
  * Equalizer:  Decrease Gain at 4.2 - 7.2 kHz.
  * Compression:  Decrease Threshold Kneepoint.
  * Tips:
    * Enlarge vent.

=== Can hear but not understand / Speech is unclear ===
  * Equalizer:  Increase Gain at 1.5 - 3.5 kHz.
  * Equalizer:  Decrease Gain at 200, 500 Hz.
  * Compression: Decrease Compression Ratio in Ch 2.
  * Advanced: Increase MPO.
  * Increase Overall Gain.

=== Can hear distant sounds but not close up ===
  * Compression: Increase Threshold Kneepoint.
  * Compression: Decrease Compression Ratio in Ch 1.
  * Compression: Decrease Compression Ratio in Ch 2.

=== Own Voice ===
==== Barrel/Hollow/Echo/Plugged/Occlusion ====
  * Equalizer:  Decrease Gain at 200, 500 Hz.
  * Compression:  Increase Compression Ratio in Ch 1.
  * Compression: Decrease Threshold Kneepoint.
  * Reduce overall Gain.
  * Advanced: Increase MPO.
  * Tips:
    * Enlarge and/or step back vent.
    * Taper canal.
    * Remake to shorten/lengthen canal accordingly.
    * Counsel.
==== Tinny/Harsh/Raspy ====
  * Equalizer: Reduce gain at 1.5 - 4.2 kHz.
  * Equalizer: Reduce gain at 4.2 - 7.2 kHz.
  * Reduce overall Gain.
  * Equalizer:  Increase Gain at 200, 500, 1000 Hz.

=== Too Loud ===
==== All Sounds Too Loud ====
  * Decrease overall Gain.
  * Equalizer:  Decrease Gain at 200, 500 Hz.
  * Advanced: Decrease MPO.
==== Loud Sounds Too Loud ====
  * Advanced: Decrease MPO.
  * Compression: Increase Compression Ratio in Ch 1.
  * Compression: Increase Compression Ratio in Ch 2.
==== Dishes/Water/Paper Too Loud ====
  * Compression: Increase Compression Ratio in Ch 2.
  * Advanced: Decrease MPO.
  * Equalizer:  Decrease Gain at 2.5 - 7.2 kHz.

=== Too Soft (Weak) ===
==== Soft Sounds Too Soft ====
  * Advanced: Disable expansion.
  * Increase Overall Gain.
==== All Sounds Too Soft ====
  * Increase Overall Gain.
  * Advanced: Increase MPO.
  * Advanced: Increase Gain at 250, 500 Hz.


=== Sounds Tinny/Harsh/Sharp ===
  * Equalizer: Decrease Gain at 2.5 - 7.2 kHz.
  * Equalizer: Decrease Gain at 4.2 - 7.2 kHz.
  * Equalizer: Increase Gain at 200, 500, 1000 Hz.

=== No Perceived Benefit ===
  * Increase Overall Gain.
  * Equalizer: Increase Gain at 1.0 kHz - 3.5 kHz.
  * Equalizer: Increase Gain at 200, 500 Hz.

=== Pumping (Cuts In and Out) ===
  * Compression: Increase Threshold Kneepoint.
  * Advanced: Increase MPO.