== Solutions Guide: Intuition 2 / Simplex 2P BTE ==
=== Feedback/Whistling ===
  * Equalizer:  Decrease Gain at 2.5 to 3.5 kHz.
  * Advanced: Activate Feedback Notch at 4000Hz.
  * Equalizer: Decrease gain at 4.5 to 6.5 kHz.
  * Equalizer: Decrease gain at 3 to 6.5 kHz.
  * Basic: Slide High Cut Corner to 2500 Hz.
  * Tips:
  * Check ear canal for wax/debris.
  * Check receiver direction and canal length.

=== Barrel/Hollow/Echo/Plugged/Occlusion ===
  * Basic: Move Low Cut Corner to the right.
  * Compression:  Increase Compression Ratio in Ch 1.
  * Compression:  Increase Compression Ratio in Ch 2.
  * Equalizer:  Increase Gain at 1.5 - 3.5 kHz.
  * Tips:
    * Enlarge and/or step back vent.
    * Taper canal.
    * Remake to shorten/lengthen canal accordingly.
    * Counsel.
    * Increase overall gain and/or low frequency Soft Gain (Ch 1) (may be due to insufficient amplification).

=== Background Noise ===
  * Basic: Move Low Cut Corner to the right.
  * Compression: Increase Compression Ratio in Ch 1.
  * Equalizer:  Increase Gain at 1.5 - 3.5 kHz.
  * Advanced: Increase Expansion Threshold.
  * Decrease overall Gain.
  * Tips:
    * If these programming solutions are insufficient, please call Audina to discuss the value of directional microphones (if not already in use).
=== Rushing Water/Fan Noise/Static/Circuit Noise ===
  * Advanced:  Increase Expansion Threshold.
  * Compression: Decrease TK in Ch 1.
  * Compression: Decrease TK in Ch 2.
  * Equalizer: Decrease Gain at 1 kHz.
  * Equalizer: Decrease Gain at 4 kHz and above.
  * Tips:
    * Increasing vent size may assist in resolving this issue.

=== Can hear but not understand / Speech is unclear ===
  * Equalizer:  Increase Gain at 1.5 - 3.5 kHz.
  * Basic: Move Low Cut Corner to the right.
  * Compression: Decrease Compression Ratio in Ch 2.
  * Advanced: Increase MPO.
  * Increase overall Gain.
  * Tips:
    * This complaint is most often a result of the upward spread of masking or insufficient high frequency emphasis.

=== Own Voice ===
==== Nasal/Stuffy ====
  * Compression: Increase Compression Ratio in Ch 1, 2.
  * Basic: Move Low Cut Corner to the right.
  * Equalizer:  Increase Gain at 1.5 - 3.5 kHz.
  * Advanced: Increase MPO.
  * Tips:
    * If you suspect this complaint is due to the occlusion effect, please refer to barrel/hollow/echo/plugged/occlusion solutions.
==== Booming/Echo ====
  * Advanced: Decrease MPO.
  * Compression: Increase Compression Ratio in Ch 1.
  * Basic: Move Low Cut Corner to the right.
  * Tips:
    * If you suspect this complaint is due to the occlusion effect, please refer to barrel/hollow/echo/plugged/occlusion solutions.

==== Tinny/Harsh/Raspy ====
  * Advanced: Decrease MPO.
  * Compression: Increase Compression Ratio in Ch 2.
  * Equalizer:  Decrease Gain at 3 kHz and above.
  * Advanced: Activate Feedback Notch at 4000Hz.
  * Tips:
    * If you suspect this complaint is due to the occlusion effect, please refer to barrel/hollow/echo/plugged/occlusion solutions.

=== Can hear distant sounds but not close up ===
  * Compression: Increase TK in Ch 2.
  * Compression: Increase TK in Ch 1.
  * Compression: Decrease Compression Ratio in Ch 1.
  * Compression: Decrease Compression Ratio in Ch 2.
  * Basic: Move Low Cut Corner to the right.
  * Increase overall Gain.
  * Tips:
    * Autofitting in Linear or MPO mode may also rectify this situation.

=== Too Loud ===
==== Only Loud Sounds Too Loud ====
  * Advanced: Decrease MPO.
  * Compression: Increase Compression Ratio in Ch 2.
  * Compression: Increase Compression Ratio in Ch 1.
==== All Sounds Too Loud ====
  * Decrease overall Gain.
  * Advanced: Decrease MPO.
  * Basic: Move Low Cut Corner to the right.
  * Dishware Sounds/Water Running Too Loud
  * Advanced: Increase Expansion Threshold.
  * Compression: Increase Compression Ratio in Ch 1 and 2.
  * Advanced: Decrease MPO.
  * Equalizer:  Decrease Gain at 2.5 kHz and above.

=== Too Soft (Weak) ===
==== Soft Sounds Too Soft ====
  * Advanced: Decrease Expansion Threshold.
  * Increase overall Gain.


==== All Sounds Too Soft ====
  * Increase overall Gain.
  * Advanced: Increase MPO.
  * Advanced: Increase Gain at 1 kHz.
  * Compression: Decrease Compression Ratio in Ch 2.
  * Compression: Decrease Compression Ratio in Ch 1.
=== Sounds Tinny/Harsh/Sharp ===
  * Equalizer: Decrease Gain at 2.5 kHz and above.
  * Compression: Increase Compression Ratio in Ch 2.
  * Advanced: Increase Gain at 1 kHz.

=== No Perceived Benefit ===
  * Increase overall Gain.
  * Equalizer: Increase Gain at 1.5 to 3 kHz.
  * Advanced: Decrease Expansion Threshold.
  * Tips:
    * If patient is a previous Linear or AGC-o user, re-autofit in the respective mode.

=== Pumping (Cuts In and Out) ===
  * Compression: Change Time Constant to Slow.
  * Compression: Increase TK in Ch 2.
  * Compression: Decrease Compression Ratio in all channels.
  * Advanced: Increase MPO.