== Solutions Guide: Accurio ==

=== Feedback/Whistling ===
  * Adaptive: Activate Adaptive Feedback Canceller.
  * Advanced: Decrease Soft Gain in Ch 3, 4.
  * Decrease gain/volume control.
  * Tips:
    * Check ear canal for wax/debris.
    * Check receiver direction and canal length.
    * Consider vent reduction.
=== Barrel/Hollow/Echo/Plugged/Occlusion ===
  * Advanced: Decrease Soft Gain in Ch 1.
  * Compression: Increase Compression Ratio in Ch 1.
  * Compression: Increase Compression Ratio in Ch 2.
  * Advanced: Increase Soft Gain in Ch 3.
  * Tips:
    * Enlarge and/or step back vent.
    * Taper canal.
    * Remake to shorten/lengthen canal accordingly.>
    * Counsel.
    * Increase overall gain and/or low frequency Soft Gain (Ch 1) (may be due to insufficient amplification).
=== Background Noise ===
  * Adaptive: Increase Adaptive Noise Reduction.
  * Advanced: Decrease Soft Gain in Ch 1.
  * Compression: Increase Compression Ratio in Ch 1.
  * Compression: Increase TK in Ch 1.
  * Advanced: Increase Soft Gain in Ch 3, 4.
  * Compression: Increase TK in Ch 3, 4.
  * Decrease gain/volume control.
  * Tips:
    * If these programming solutions are insufficient, please call Audina to discuss the value of directional microphones (if not already in use).

=== Rushing Water/Fan Noise/Static/Circuit Noise ===
  * Advanced: Increase Expansion Ratio to 1:3.
  * Advanced: Increase Expansion Threshold.
  * Advanced: Decrease Soft Gain in Ch 1.
  * Advanced: Decrease Soft Gain in Ch 4.
  * Compression: Decrease TK in Ch 1.
  * Compression: Decrease TK in Ch 3, 4.
  * Tips:
    * Increasing vent size may assist in resolving this issue.

=== Can hear but not understand / Speech is unclear ===
  * Advanced: Increase Soft Gain in Ch 3, 4.
  * Advanced: Decrease Soft Gain in Ch 1.
  * Compression: Decrease compression ratio in Ch 2, 3.
  * Advanced: Increase MPO.
  * Increase gain/volume control.
  * Adaptive: Increase level of Adaptive Noise Reduction.
  * Tips:
    * This complaint is most often a result of the upward spread of masking or insufficient high frequency emphasis.

=== Own Voice ===
==== Nasal/Stuffy ====
  * Compression: Increase compression ratio in Ch 1, 2.
  * Advanced: Decrease Soft Gain in Ch 1.
  * Advanced: Increase Soft Gain in Ch 3.
  * Advanced: Increase MPO.
  * Tips:
    * If you suspect this complaint is due to the occlusion effect, please refer to barrel/hollow/echo/plugged/occlusion solutions.
==== Booming/Echo ====
  * Advanced: Decrease MPO.
  * Compression: Increase compression ratio in Ch 1.
  * Advanced: Decrease Soft Gain in Ch 1.
  * Tips:
    * If you suspect this complaint is due to the occlusion effect, please refer to barrel/hollow/echo/plugged/occlusion solutions.
==== Tinny/Harsh/Raspy ====
  * Advanced: Decrease MPO.
  * Compression: Increase compression ratio in Ch 3, 4.
  * Advanced: Decrease Soft Gain in Ch 3, 4.
  * Tips:
    * If you suspect this complaint is due to the occlusion effect, please refer to barrel/hollow/echo/plugged/occlusion solutions.

==== Can hear distant sounds but not close up ====
  * Compression: Increase TK in Ch 3, 4.
  * Compression: Increase Soft TK in Ch 1, 2.
  * Compression: Decrease Compression Ratio in Ch 1, 2.
  * Compression: Decrease Compression Ratio in Ch 3, 4.
  * Advanced: Decrease Soft Gain in Ch 1.
  * Increase gain/volume control
  * Tips:
    * Autofitting in Linear or MPO mode may also rectify this situation.

=== Too Loud ===
==== Only Loud Sounds Too Loud ====
  * Advanced: Decrease MPO.
  * Compression: Increase Compression Ratio in Ch 3, 4.
  * Compression: Increase Compression Ratio in Ch 1, 2.

==== All Sounds Too Loud ====
  * Decrease gain/volume control.
  * Advanced: Decrease MPO.
  * Advanced: Decrease Soft Gain in Ch 1.

==== Dishware Sounds/Water Running Too Loud ====
  * Adaptive: Increase level of Adaptive Noise Reduction.
  * Compression: Increase Compression Ratio in Ch 3, 4.
  * Advanced: Decrease MPO.
  * Advanced: Decrease Soft Gain in Ch 3, 4.

=== Too Soft (Weak) ===
==== Soft Sounds Too Soft ====
  * Advanced: Decrease Expansion Ratio.
  * Adaptive: Decrease level of Adaptive Noise Reduction.
  * Increase gain/volume control.
==== All Sounds Too Soft ====
  * Increase gain/volume control.
  * Advanced: Increase MPO.
  * Advanced: Increase Soft Gain in Ch 2, 3.
  * Compression: Decrease Compression Ratio in Ch 1, 2.
  * Compression: Decrease Compression Ratio in Ch 3, 4.

=== Sounds Tinny/Harsh/Sharp ===
  * Advanced: Decrease Soft Gain in Ch 3, 4.
  * Compression: Increase compression ratio in Ch 3, 4.
  * Advanced: Increase Soft Gain in Ch 1.

=== No Perceived Benefit ===
  * Increase gain/volume control.
  * Advanced: Increase Soft Gain in Ch 3, 4.
  * Advanced: Decrease Expansion Ratio.
  * Adaptive: Decrease level of Adaptive Noise Reduction.
  * Tips:
    * If patient is a previous Linear or AGC-o user, re-autofit in the respective mode.

=== Pumping (Cuts In and Out) ===
  * Advanced: Change Time Constant to Slow.
  * Advanced: Increase TK in Ch 3, 4.
  * Compression: Decrease Compression Ratio in all channels.