= HiPro Error Codes =

^ Error Code ^ Description ^
| 010  | "Framing error reported from HI-PRO"                                                                                     |
| 011  | "Receiver overrun error reported from HI-PRO"                                                                            |
| 012  | "Receiver noise on line error reported from HI-PRO"                                                                      |
| 015  | "Receiver timeout error reported from HI-PRO"                                                                            |
| 020  | "Invalid message number reported from HI-PRO"                                                                            |
| 021  | "Invalid message header reported from HI-PRO"                                                                            |
| 022  | "Invalid data reported from HI-PRO"                                                                                      |
| 023  | "Message termination error reported from HI-PRO"                                                                         |
| 030  | "Too many characters in argument reported from HI-PRO"                                                                   |
| 031  | "Too few data in stream argument reported from HI-PRO"                                                                   |
| 032  | "Too many data in stream argument reported from HI-PRO"                                                                  |
| 033  | "Data argument out of valid range reported from HI-PRO"                                                                  |
| 034  | "Too few data in hex byte data block reported from HI-PRO"                                                               |
| 035  | "Requested data is not available reported from HI-PRO"                                                                   |
| 036  | "Invalid data in input buffer reported from HI-PRO"                                                                      |
| 037  | "Invalid communication mode reported from HI-PRO"                                                                        |
| 038  | "Timing too fast reported from HI-PRO"                                                                                   |
| 040  | "Out of memory reported from HI-PRO"                                                                                     |
| 041  | "Learn is not started reported from HI-PRO"                                                                              |
| 042  | "All ready in learn mode reported from HI-PRO"                                                                           |
| 043  | "No output bit stream defined reported from HI-PRO"                                                                      |
| 044  | "No input specification defined reported from HI-PRO"                                                                    |
| 045  | "No pin specification defined reported from HI-PRO"                                                                      |
| 046  | "H.I. timeout reported from HI-PRO"                                                                                      |
| 047  | "The connected HI-PRO could not be authenticated (Device authentication). Please contact your supplier for assistance"   |
| 048  | "Input Buffer is Full reported from HI-PRO"                                                                              |
| 049  | "ADC timeout reported from HI-PRO"                                                                                       |
| 050  | "Checksum error reported from HI-PRO"                                                                                    |
| 051  | "Flash verify error reported from HI-PRO"                                                                                |
| 052  | "Invalid downloaded program reported from HI-PRO"                                                                        |
| 099  | "Undefined error reported from HI-PRO"                                                                                   |
| 200  | "TIMEOUT""HI-PRO does not respond""Check power and RS232 connections"                                                    |
| 201  | "Error in WriteComm?""GetCommError? returns %d"                                                                          |
| 202  | "Error in OpenComm?""COM port may be in use by another device. Try to change COMPort= in HIPRO.INI."                     |
| 203  | "Error in SetCommState?"                                                                                                 |
| 204  | "Error in BuildCommDCB"                                                                                                  |
| 205  | "User was not logged in"                                                                                                 |
| 206  | "HI-PRO has been reset ( settings lost )"                                                                                |
| 207  | "Invalid data received from HI-PRO"                                                                                      |
| 208  | "Invalid header received from HI-PRO"                                                                                    |
| 209  | "Too big stream received from HI-PRO"                                                                                    |
| 210  | "Numerics received from HI-PRO is out of range"                                                                          |
| 211  | "No terminator in data from HI-PRO"                                                                                      |
| 212  | "Incomplete block received from HI-PRO"                                                                                  |
| 213  | "Error in ReadComm?""GetCommError? returns %d"                                                                           |
| 214  | "Unexpected data from HI-PRO"                                                                                            |
| 215  | "Bad CheckSum? in data received from HI-PRO"                                                                             |
| 216  | "Error in CloseComm?"                                                                                                    |
| 217  | "Bad Parameter send to instrument driver"                                                                                |
| 218  | "VBat low. Disconnect HI from HI-PRO"                                                                                    |
| 219  | "Self test status error"                                                                                                 |
| 221  | "Receiver overflow""Input buffer too small or not emptied"                                                               |
| 222  | "Overrun""Interrupts disabled too long time. Try lower baudrate."                                                        |
| 223  | "Parity error"                                                                                                           |
| 224  | "Framing error""Wrong instrument connected or instrument turned off"                                                     |
| 225  | "Break detected""Wrong instrument connected or instrument turned off"                                                    |
| 226  | "Transmission queue was full""Output buffer too small"                                                                   |
| 227  | "Requested mode is not supported, or the idComDev parameter is invalid"                                                  |
| 228  | "Transmission queue never empties! Maybe IRQ conflict"                                                                   |
| 229  | "The connected HI-PRO could not be authenticated (PC Driver authentication). Please contact your supplier for assistance"|
| 255  | "Unknown error" |