== ezFIT Optimizer (for Clarujust) Test Protocol ==
=== Test 1: Automated Test Cases ===

  * Run ezFITLiteClient.
  * Start Optimizer Server.
  * Set Serial Number, Device ID, and Audiogram (40 dB flat symmetrical hearing loss).
  * Run Unit Test.
  * Open Log and analyze it.
=== Test 2: Ad Hoc Tests ===

  * Run ezFITLiteClient.
  * Start Optimizer Server.
  * Set Serial Number, Device ID, and Audiogram (40 dB flat symmetrical hearing loss).
  * Perform the following operations:
      * Set Baseline60.
      * Change Bump, Tilt, and/or Gain.
      * Apply Settings.
      * Set Baseline80.
      * Change Bump, Tilt, and/or Gain.
      * Apply Settings.
      * Set Output60 and Output80.
      * Set Compression.
  * Open Log and analyze it. 
  * Repeat the previous steps as many times as necessary, with variations to Bump, Tilt, and Gain.

=== Test 3: Application Test ===

  * Run ezFIT.
  * Create a Patient record with audiograms (40 dB flat symmetrical hearing loss).
  * Read hearing instruments (both) with ezFIT.
  * Perform standard "Normal (WDRC)" autofit for both instruments.
  * Perform Clarujust autofit for both instruments.
  * Program the hearing instruments.
  * Open Log and analyze it. In ezFIT, Tools > ezControl Center.  In the new screen, Log > ezFIT Optimizer.

=== Test 4: Verifit Test ===

  * Analyze hearing instrument with Verifit analyzer.